1,142 Hits in 4.8 sec

Wireless sensor network-enabled intravenous infusion monitoring

Y. Zhang, S.F. Zhang, Y. Ji, G.X. Wu
2011 IET Wireless Sensor Systems  
The proposed system is a wireless sensor system based on taking a fork-type light barrier as a sensor, a micro-control unit (MCU) as a ZigBee-based radio frequency device.  ...  In order to resolve this problem and provide a networkable solution the authors propose a novel radio frequency identification-based wireless sensor networkable intravenous infusion monitoring system.  ...  ., 2011, Vol. 1, Iss. 4, pp. 241-247 Table 1 1 Comparison of droplet monitoring sensors Fig. 3 Schematic of the sensor component IET Wirel. Sens.  ... 
doi:10.1049/iet-wss.2011.0031 fatcat:gn5ywdazvzduxfnubbefkp6u3u

A cross-layer congestion and contention window control scheme for TCP performance improvement in wireless LANs

Der-Jiunn Deng, Rung-Shiang Cheng, Heng-Jia Chang, Hui-Tang Lin, Ruay-Shiung Chang
2009 Telecommunications Systems  
(SCI,EI) (Book Chapters) (1) Ruay-Shiung Chang and Shou-Hung Wang, "Deployment Strategies for Wireless Sensor Networks," in Handbook of Research on Developments and Trends in Wireless Sensor  ...  Chang, "Flooding-Limited for Multi-Constrained QoS Routing Protocol in Mobile Ad Hoc Networks," IET Communications, Volume 2, Issue 7, August 2008 Page(s):972 -981.  ... 
doi:10.1007/s11235-009-9166-9 fatcat:n3ugtgszpre4pcrl5us3hev7vy

Wireless and batteryless biomedical microsystem for neural recording and epilepsy suppression based on brain focal cooling

K.-C. Hou, Y.-H. Huang, C.-W. Chang, F.-Z. Shaw, J.-C. Chiou
2011 IET Nanobiotechnology  
This work presents a biomedical microsystem with a wireless radiofrequency (RF)-powered electronics and versatile sensors/actuators for use in nanomedicinal diagnosis and therapy.  ...  Miniaturised spiral coils as a wireless power module with low-dropout linear regulator circuit convert RF signals into a DC voltage, can be implanted without a battery in monitoring free behaviour.  ...  Fig. 1 1 System structure of the presented wireless powering device in an implant microsystem Photographs of a Chip, a LDO RF-DC regulators and a TE module are also displayed Fig. 2 2 Placement of an  ... 
doi:10.1049/iet-nbt.2011.0017 pmid:22149871 fatcat:xk7flfjshvendbfya3rwbqh2lu

Fault Early Warning in Air-insulated Substations by RSSI-Based Angle of Arrival Estimation and Monopole UHF Wireless Sensor Array

FAN WU, Lingen Luo, Hui Song, Gehao sheng, Jiang Xiuceng
2020 IET Generation, Transmission & Distribution  
This study proposes a received signal strength indicator (RSSI)-based angle of arrival (AoA) method using the monopole UHF wireless sensor array.  ...  A field test is performed to verify the effectiveness of the proposed PD localisation system. The results show that the estimated error on average is below 3.5°.  ...  The whole PD localisation system consists of the UHF wireless sensor array, a PD source simulator, and a computer.  ... 
doi:10.1049/iet-gtd.2019.0813 fatcat:p7qhrr334ffthkogunfhunzqwy

Wearable Health Technology using Biosensor

Sneha Nagar, Mohd Zafar Ansari
2019 Zenodo  
Wearable's are object that worn on body and sensor is a biological transducer that convert biological response into electrical signals depends on applications, wearable biosensors are capable of continuous  ...  Journal of Bio-Medical & Instrumentation Engineering Volume 4 Issue 1 AUTHORS PROFILE [1] Sneha Nagar, Assistant professor Department: Electronics and Communication, College: IET, Davv.  ...  This sensor provides real time information of patient through wireless system to healthcare system. This sensor provides two-way feed backs between healthcare provider and patient.  ... 
doi:10.5281/zenodo.2579831 fatcat:l62qhrxk7bgcxiuolop7ovks7a

TIM Lecture Series – Building Trust in an IoT-Enabled World

Jeremy Watson, John Marshall, Mike Young, Peter Smetny, David Mann
2017 Technology Innovation Management Review  
The Internet of Things (IoT) covers a wide spectrum of human endeavour, and there are great concerns about the safety, security, and robustness of systems and networks that will enable this massive connected  ...  To share insights about the increasingly important topic of trust and security in the IoT, the first TIM lecture of 2017 was jointly organized by the IET Ottawa Local Network and Carleton University's  ...  (e.g., sensors and access controls, heating and cooling systems), industrial and utilities control systems (e.g., sensors and actuators), medical and hospital equipment (e.g., patient monitors and patient  ... 
doi:10.22215/timreview1084 fatcat:c6fmh3dgzfht3lut2f6o7nyzh4

Research on optimisation processing of spatiotemporal correlation temperature and humidity data based on wireless sensor networks in cigarette factory

Yusheng Liao, Jingwang Ran, Xianjiang Zhou
2019 The Journal of Engineering  
processing of wireless sensor networks (WSNs).  ...  Based on the temperature and humidity monitoring system of cigarette factory, the authors optimised the temperature and humidity data obtained by wireless sensors.  ...  The system consisted of WSN of temperature and humidity and remote transferring sub-system based on 3G wireless network.  ... 
doi:10.1049/joe.2018.9222 fatcat:f4cuxrsu2jh6fg7rj2rvfdagci

IoT cloud-based cyber-physical system for efficient solid waste management in smart cities: a novel cost function based route optimisation technique for waste collection vehicles using dustbin sensors and real-time road traffic informatics

Ayaskanta Mishra, Arun Kumar Ray
2020 IET Cyber-Physical Systems  
IoT cloud-based connected smart dustbins (equipped with sensors) are imperative for efficient waste management in smart city.  ...  can reduce the use of both man and machine by cutting down their overall waste collection route distance as well as number of waste collection vehicles (WCVs) by deploying this proposed cyber-physical system  ...  Fig. 1 1 Proposed IoT-enabled waste management system for smart cities to find the optimised route for WCVs IET Cyber-Phys.  ... 
doi:10.1049/iet-cps.2019.0110 fatcat:b6djnganobdwnedfvzutxowpym


Sk. Naveed, N.Ramya, D.Manasa, N. Ramya Sri
2020 EPRA international journal of research & development  
The purpose of this project is to develop face recognition based automated student attendance system.  ...  Face recognition is a personal identification system that uses personal characteristics or facial features of a person to identify the person's identity.  ...  IET Networks (2020). 25. An efficient energy saving scheme through sorting technique for wireless sensor network.  ... 
doi:10.36713/epra5585 fatcat:cdhajcgqojbrvetg76pfhgsuru

Modelling and simulation techniques for highly integrated, low-power wireless sensor networks

B. Otis, S. Gambini, R. Shah, D. Steingart, E. Quévy, J. Rabaey, A. Sangiovanni-Vincentelli, P. Wright
2007 IET Computers & Digital Techniques  
that will enable pervasive systems such as wireless sensor networks.  ...  The design of state-of-the-art low-power wireless sensor nodes involves the convergence of many technologies and disciplines.  ...  Acknowledgments The authors would like to acknowledge the Mixed Signal Circuits and Systems division of Philips Research Laboratories, Eindhoven for funding the work on High-Speed Cascaded modulators,  ... 
doi:10.1049/iet-cdt:20050214 fatcat:q55jf54g7bhmndq6xisv2ayxim


N.Ramya, D.Manasa, N.Ramya Sri, Sk.Naveed
2020 EPRA international journal of research & development  
In traditional attendance system, the students are called out by the teachers and their presence or absence is marked accordingly.  ...  Using the face characteristics as biometric, the face recognition system can be implemented. The most demanding task in any organization is attendance marking.  ...  IET Wireless Sensor Systems, 9, 6 (Dec. 2019), 358-365(7). 29. Journal of Engineering and Technical Research, 8 (2020), 5335-5343.  ... 
doi:10.36713/epra5586 fatcat:aeraj7kqi5cmrjs6artnnijhru

Passive wireless respiratory sensor

Bin Feng, Kai Zhao, Qiucheng Su, Zhentao Yu, Hao Jin
2021 Electronics Letters  
In this letter, a passive wireless respiratory sensor is developed, which is based on a surface acoustic wave (SAW) microsensor using graphene oxide as a sensitive layer.  ...  The respiratory rate that the sensing system can measure is greater than 33 breaths per minute, outcompeting the average number of breaths per minute from an adult (i.e. 16-20 breaths per minute).  ...  The principle of a wireless SAW sensor is well known [10] , and herein will not be discussed. The experimental setup for OSAS monitoring system is shown in Figure 1 .  ... 
doi:10.1049/ell2.12248 fatcat:dgyv7kgzhvd3tdc43eey7ls5w4

Blood leakage detection during dialysis therapy based on fog computing with array photocell sensors and heteroassociative memory model

Jian-Xing Wu, Ping-Tzan Huang, Chia-Hung Lin, Chien-Ming Li
2018 Healthcare technology letters  
More than 40% of adult blood volume can be lost in just a few minutes, resulting in morbidities and mortality.  ...  The HAM model is implemented to design a virtual alarm unit using electricity changes in an embedded system.  ...  Its firmware system integrated with the flexible sensor and the HAM application software took <0.15 ms to deal with the task in the fog layer and further transmitted the warning information via wireless  ... 
doi:10.1049/htl.2017.0091 pmid:29515815 pmcid:PMC5830936 fatcat:yi2qrgxf2jdctgmiwj6mksuhl4

Potential Applications of 5G Communication Technologies in Collaborative Intelligent Manufacturing

Weiming Shen, Yanjun Shi, Qiaomei Han, Hui Zhang
2019 IET Collaborative Intelligent Manufacturing  
This study is to investigate the integration of 5G wireless communication technologies with collaborative intelligent manufacturing (CIM) processes and systems. 5G technologies and typical scenarios including  ...  A modular collaborative production approach is suggested to combine modules to achieve on-demand resource allocation and complete flexible tasks in CIM systems.  ...  wireless sensor networks N/A N/A 10 6 /km 2 10 years' service life N/A 50 ms N/A uRLLC real-time monitoring N/A N/A 10 4 /km 2 N/A 99.9% 50 ms-1 s N/A automation control based  ... 
doi:10.1049/iet-cim.2019.0007 fatcat:qkud4abz7nep3ghqtpmzllgsne

Call for Special Issue Papers: Deep Learning Blockchain-enabled Technology for Improved Healthcare Industrial Systems

Mazin Abed Mohammed, Seifedine Kadry, Oana Geman
2022 Acta Informatica Pragensia  
He is a Fellow of IET, a Fellow of IETE, and a Fellow of IACSIT. He is a distinguished speaker of the IEEE Computer Society.  ...  At present, his research focuses on data science, education using technology, system prognostics, stochastic systems and applied mathematics.  ...  An IoMT industrial network consists of different bio-medical sensors, wireless technologies and cloud computing services to run different healthcare applications.  ... 
doi:10.18267/j.aip.175 fatcat:vre43foyf5hytm4umdby24xjam
« Previous Showing results 1 — 15 out of 1,142 results