177 Hits in 9.7 sec

Failure by Fracture and Fatigue in "Nano" and "Bio" Materials

2004 JSME international journal. Series A, Solid mechanics and material engineering  
John Kinney, Jay Kruzic, Roya Maboudian, James Sto lken, Christian Puttlitz, Antoni Tomsia and in particular Eric Stach for their collaboration with us on these studies.  ...  Acknowledgments This work was supported by the Director, the Office of Science, Office of Basic Energy Sciences, Division of M aterials Sciences and Engineering,of the U.S.  ...  three-dimensional reconstructions.  ... 
doi:10.1299/jsmea.47.238 fatcat:sljcs3msczbdvc5vyfx2fvvpza

Supply Chain Management Strategy for Recycled Materials to Support Sustainable Construction

Mochamad Agung Wibowo, Elizar, Moh Nur Sholeh, Hadjar Seti Adji
2017 Procedia Engineering  
The strength, deformation and cracks growth of UHPPFRC mini shells will be studied in correlation with the variation of shell height and contents of the polypropylene fiber. the shear modulus of the three-ply  ...  Five of these conditions rere the compressive, the other five were tensile and the last was without any normal force.  ...  a curing time of 14 days had the largest compressive strength of soil which was -; :"n2, The use of 2% cement on clay had a compressive strength of 7.77 kgfcm2,while the use of 1% cement : ^ ad a compressive  ... 
doi:10.1016/j.proeng.2017.01.325 fatcat:tsgfc7qvnbhw3cwdcjte3iesv4

Application of Nondestructive Testing Technology in Quality Evaluation of Plain Concrete and RC Structures in Bridge Engineering: A Review

Yuanxun Zheng, Shaoqiang Wang, Peng Zhang, Tongxin Xu, Jingbo Zhuo
2022 Buildings  
intelligence technology with neural network deep learning, precise positioning, and imaging analysis of the quality defects in prestressed reinforced concrete structures.  ...  Additionally, the advantages, disadvantages, and application scope of each detection method were focused upon and analyzed comparatively.  ...  (c) Pre-training is carried out in the way of a multi-layer self-encoding neural network and then combined with the identification information to further optimize the deep belief network (DBN) of the neural  ... 
doi:10.3390/buildings12060843 doaj:cfee0cdb91e74ae9babb63d01875f908 fatcat:rwfi6njh7ra2nnqmvvlesndgnq

2021 Index IEEE Transactions on Instrumentation and Measurement Vol. 70

2021 IEEE Transactions on Instrumentation and Measurement  
The primary entry includes the coauthors' names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, and article number.  ...  Article numbers are based on specified topic areas and corresponding codes associated with the publication.  ...  ., +, TIM 2021 7000908 Belief networks A Deep Learning-Based Weld Defect Classification Method Using Radio-graphic Images With a Cylindrical Projection.  ... 
doi:10.1109/tim.2022.3156705 fatcat:dmqderzenrcopoyipv3v4vh4ry

Machine Learning Driven New Material Discovery

Jiazhen Cai, Xuan Chu, Kun Xu, Hongbo Li, Jing Wei
2020 Nanoscale Advances  
New materials can bring tremendous technology and application progress. But now the commonly used trierand-error method can't meet the need today.  ...  Now, a newly proposed idea using machine learning to...  ...  Wei acknowledges that this project was funded by China Postdoctoral Science Foundation (no. 2017 M620694) and National Postdoctoral Program for Innovative Talents (BX201700040). Notes and references  ... 
doi:10.1039/d0na00388c fatcat:pvvkfcfcufarjdxx5rr7l2fqvq

Full Issue PDF

2003 Operative dentistry  
Lussi A & Schaffner M (2000) Progression of and risk factors for dental erosion and wedge-shaped defects over a 6-year period Caries Research 34 182-187.  ...  of the imaging system.  ...  (Received 16 April 2002) Acknowledgements The authors acknowledge Dentsply, UK, 3M ESPE, UK and GC, UK for supplying the ChemFlex, KetacFil Plus and Fuji IXGP materials used in the study.  ... 
doi:10.2341/1559-2863-28-2-1 fatcat:f66spduqore5njw7raew534gqy

Machine Learning in Materials Science [chapter]

Tim Mueller, Aaron Gilad Kusne, Rampi Ramprasad
2016 Reviews in computational chemistry  
Kenny Lipkowitz of the Office of Naval Research for the opportunity and invitation to create this manuscript.  ...  This approach is sometimes known as the lasso estimator or compressive sensing, 52, 53 and it is useful when the solution is sparse.  ...  be identified in the images and used to map and identify users in a lower-dimensional fingerprint feature space.  ... 
doi:10.1002/9781119148739.ch4 fatcat:zhicn5msrnhbhamslmet2c2rqi

Comparative Analysis of Different Machine Learning Classifiers for the Prediction of Chronic Diseases [chapter]

Rajesh Singh, Anita Gehlot, Dharam Buddhi
2022 Comparative Analysis of Different Machine Learning Classifiers for the Prediction of Chronic Diseases  
This paper forms the basis of understanding the difficulty of the domain and the amount of efficiency achieved by the various methods recently.  ...  Chronic Diseases are the most dangerous diseases for humans and have significant effects on human life. Chronic Diseases like heart disease & Diabetes are the main causes of death.  ...  Acknowledgement The authors of this manuscript thanks Uttaranchal University for encouragement and motivation in using advance technology in Horticulture. 7. many research studies are being done to improve  ... 
doi:10.13052/rp-9788770227667 fatcat:da47mjbbyzfwnbpde7rgbrlppe

Micro-proppant placement in hydraulic and natural fracture stimulation in unconventional reservoirs: A review

Masoud Aslannezhad, Azim Kalantariasl, Zhenjiang You, Stefan Iglauer, Alireza Keshavarz
2021 Energy Reports  
Hydraulic fracturing is a technique extensively employed in the oil and gas industry to generate fractures including primary and secondary fractures. To keep these fractures open, proppants are used.  ...  This review concludes that using micro-proppants can improve the efficiency of the hydraulic fracturing treatment, leading to enhanced oil and gas production.  ...  To make sure the sand has enough compressive strength for use in certain application, it needs to be tested.  ... 
doi:10.1016/j.egyr.2021.11.220 fatcat:ejrt67arznbujjk22rfozt2m5m

4th Annual Meeting of the Spine Society of Europe, September 11 - 14, 2002, Nantes, France

2002 European spine journal  
AXIAL AND TANGENTIAL FIXATION STRENGTH OF PEDICLE SCREWS VERSUS HOOKS IN THE THORACIC SPINE IN RELATION TO BONE MINERAL DENSITY  ...  For each of them a personalized FEM of the spine and pelvis was constructed: geometry was extracted from a 3D stereoradiographic reconstruction and mechanical properties were personalized using lateral  ...  Three-dimensional displacement was measured using an optical measurement system (Qualysis). First all motion segments were tested intact.  ... 
doi:10.1007/s00586-002-0480-0 fatcat:etzhvfg3jbguhoktjquziczx6a

Table of Contents

2016 Australian Journal of Primary Health  
A mirrored image-pair is used to observe this structure from two perspectives simultaneously, allowing for three-dimensional characterization of the coil motion.  ...  54% between uniform vegetation and vertical varying vegetation from the shallow water condition to deep water condition.Wave Generation Studies of the Three-Dimensional Wave BasinTao XiangSchool of Civil  ... 
doi:10.1071/pyv22n4toc fatcat:hrwhnxdpjreslhuwi7y4edqmo4

Experimental Study of Filter Cake Cracking During Deliquoring

2010 Scientia Pharmaceutica  
The parameters were studied at a laboratory scale using a Nutsche filter, and a model system of calcium carbonate in deionised water was used, occasionally with additions of ethanol, polyethylene glycol  ...  They show that crucial output parameters such as residual moisture content and permeability ratio can be reduced, and that filter cake cracking can be influenced and ultimately eliminated through careful  ...  Low water / cement ratio necessitates the use of a superplasticizer, which must be specific and compatible with the cement form.  ... 
doi:10.3797/scipharm.cespt.8.pms34 fatcat:thge65hamjaifjc3qeahwnplyu

Public Health Aspects' Assessment Tool for Urban Projects, According to the Urban Health Approach [chapter]

Stefano Capolongo, Maddalena Buffoli, Erica Isa Mosca, Daniela Galeone, Roberto D'Elia, Andrea Rebecchi
2019 Built Heritage: Monitoring Conservation Management  
This might take the form of measurable social and economic outcomes, in addition to environmental benefits, or improved efficiency in the use of resources; it might also involve an original mix of intervention  ...  and aerospace, Ongoing training and continuing education.  ...  Vignati Architecture, Built Environment and Construction Engineering-ABC Department, Politecnico di Milano, Milan, Italy e-mail:  ... 
doi:10.1007/978-3-030-33256-3_30 fatcat:mdquedcpwvd2hbfevb6wvzkdbu


1958 Journal of The American Ceramic Society  
—Exhaustive tests were made of the mechanical and compressive strength, elastic modulus, hardness, adhesion between brick and cement or mortar, bending strength, abrasion, deformation, creep, and wear  ...  Firing behavior, rotary kiln production, compressive strength, and additives are discussed. A.C.B. Vanadium efflorescence and its control by the use of fluorspar.  ... 
doi:10.1111/j.1151-2916.1958.tb12916.x fatcat:pzwi45rtmjguhkrjjxkvx6s4ie

Penilaian Kualiti Laporan EIA Dalam Aspek Kajian Hakisan Tanah [article]

Abdul Mahmud
2020 Figshare  
Methodology: This study has used quantitative content analysis method to evaluate the quality of the EIA report. There are 7 review areas has been evaluted in each EIA report.  ...  The scale of measurement 0 to 5 has been used to rating score quality for each item. 35 samples of EIA report for housing projects from the year 2012 to 2016 were evaluated.  ...  Compressive strength of LFC increases with age and density while water cured LFC has high compressive strength.  ... 
doi:10.6084/m9.figshare.12095736 fatcat:fzsit3wyqjc3fni4no4zzopz5e
« Previous Showing results 1 — 15 out of 177 results