A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf
.
Filters
Intelligent wireless charging station for electric vehicles
2017
2017 International Siberian Conference on Control and Communications (SIBCON)
Developed system will save the time of driver, reduce human error in car WPT technique, save energy, and can start to charge the car intelligently during off-peak period. ...
Wireless Power Transfer (WPT) is considered as a plugless alternative for Electric Vehicle (EV) charging. ...
However, for charging the vehicles; driver has to park and accurately align the vehicle over the hotspot point to reach proper performance of wireless charging system. ...
doi:10.1109/sibcon.2017.7998497
fatcat:jv23dckelfb2zjqusw5wvwxzei
IMPROVED REMOTE-CONTROL WIRELESS SENSING SYSTEM OF PLANT GROWTH FACTORS IN GREENHOUSE ENVIRONMENT
远程控制型温室环境植物生长要素无线检测系统
2019
INMATEH Agricultural Engineering
远程控制型温室环境植物生长要素无线检测系统
The proposed system is suitable for precision management of key factors in greenhouse and it also exhibits improved functional performance compared with our previously reported sensing system. ...
In order to satisfy the requirement of remote control, GSM module was integrated in the sensing system. ...
ACKNOWLEDGEMENT The authors wish to express their gratitude to the National Natural Science Foundation of China ( ...
doi:10.35633/inmateh_57_16
fatcat:f7lil27dnvbpzp2nlznhorkmve
Performance Analysis of Wireless Network Control Systems Using Different Controllers
2012
Al-Rafidain Engineering Journal
So in this paper we discussed the effect of using different controllers (such as P, PID, Fuzzy, ...) on the overall system performance. ...
The experimental measurements show that the using of fuzzy controller gives best results where it can minimizes the effect of the network delay on the system behavior as much as possible. 48 B J me ...
delay does not has a sensible effect on the performance of WCS. ...
doi:10.33899/rengj.2012.54155
fatcat:n7oruurrdzb63ohuz6icqvo7si
Performance Analysis of K-mean Clustering Map for Different Nodes
2018
International Journal of Trend in Scientific Research and Development
In this paper we compared the simulation results of the K-mean techniques for different numbers of nodes like 50, 100 and 150. ...
Wireless sensor nodes are randomly installed and communicate themselves through the wireless communication medium. ...
Each node of the network consists of three subsystems: the sensor subsystem which senses the environment, the processing subsystem which performs local computation on the sensed data, and the communication ...
doi:10.31142/ijtsrd18859
fatcat:pzakww7enfbmvkttefzjdf6ayi
Dependability for the Internet of Things—from dependable networking in harsh environments to a holistic view on dependability
2016
e & i Elektrotechnik und Informationstechnik
We first outline our contributions in the area of dependable wireless networking and describe a cost-effective solution allowing to guarantee that IoT applications meet specific performance requirements ...
despite the challenging interaction of low-power wireless networks with their surrounding environment. ...
Acknowledgements This work was performed within the LEAD-Project "Dependable Internet of Things in Adverse Environments", funded by Graz University of Technology, and within the EU FP7 project RELYonIT ...
doi:10.1007/s00502-016-0436-4
fatcat:gb7xjegclrfn5eee4343eiy7n4
An instrument scheduler design for energy neutral coastal monitoring systems deployment
2014
Proceedings of the 2nd International Workshop on Energy Neutral Sensing Systems - ENSsys '14
The deployed systems demonstrate how duty cycling can achieve substantial energy savings on a diverse set of devices through complete shutdown. ...
The current circuit hardware is capable of switching four power channels, including one for itself. ...
The authors would like to thank Professor Peter Rosen in the Department of Marine and Environmental Sciences in Northeastern University for the constructive suggestions. ...
doi:10.1145/2675683.2675684
dblp:conf/sensys/ZhangLWPC14
fatcat:vtawe63xpjfjfhacgsee4ky55a
La-CTP: Loop-Aware Routing for Energy-Harvesting Wireless Sensor Networks
2018
Sensors
the risk of performance deterioration. ...
In emerging energy-harvesting wireless sensor networks (EH-WSN), the sensor nodes can harvest environmental energy to drive their operation, releasing the user's burden in terms of frequent battery replacement ...
Conflicts of Interest: The authors declare no conflict of interest. ...
doi:10.3390/s18020434
pmid:29393876
pmcid:PMC5855061
fatcat:ep7yg3nlprdqfbhiycsptua26q
Data Collection Method for Mobile Control Sink Node in Wireless Sensor Network Based on Compressive Sensing
2016
MATEC Web of Conferences
The paper proposes a mobile control sink node data collection method in the wireless sensor network based on compressive sensing. ...
Simulation results show that this method has higher network throughput and better energy efficiency, capable of collecting a huge amount of data with balanced energy consumption in the network. ...
ACKNOWLEDGMENT This research was supported by the doctor's scientific research foundation of Hezhou University ...
doi:10.1051/matecconf/20164009007
fatcat:ptg4v5htangs7ds563mrv42p64
Navigation Ground Augmentation System Based on a Wireless Sensor
2018
International Journal of Online Engineering (iJOE)
To improve the performance of navigation systems and expand their application, a navigation ground augmentation system platform was designed based on wireless sensor. ...
Results showed that the system satisfied the design requirements and could effectively improve the performance of the navigation system. ...
Therefore, the system satisfies the design requirements and can effectively improve the performance of the navigation system. ...
doi:10.3991/ijoe.v14i08.9183
fatcat:cl2rk7kxfjgklonpaybvin6d4i
Sensor Nodes and System Proposal for Security and Environmental Data Collection in Developing Countries
2020
Industrial Engineering
In addition to the use of GSM and microcontroller-based processing unit as in few systems, the proposed system here used RF-based sensor nodes for local area data sensing. ...
This paper consists of RF-based sensor nodes design for survey of critical areas and distance collection of useful environmental data such as pollutants, pluviometry, temperature and humidity. ...
Review of Technologies, Communication, Control and Security Systems Although wired systems are still in use because of some of their advantages over wireless Local Area Network (LAN), wireless security ...
doi:10.11648/j.ie.20200401.12
fatcat:rfyi3bdfora5tcab4lqdr47dva
Mitigating the Effect of Latency Constraints on Industrial Process Control Monitoring Over Wireless Using Predictive Approach
2021
International journal of research and innovation in applied science
This paper presents mitigating the effect of latency constraints on industrial process control monitoring over wireless using predictive approach. ...
The study reviewed many literatures on the challenges of quality communication services in control system industries and identified latency as the major constraint which is caused by the behaviors of Remote ...
Mark (2020) [9] Low latency Network for control system application The study analyzed the impact of latency on closed loop control systems. ...
doi:10.51584/ijrias.2021.61106
fatcat:r4eoqg7hhrdxjogsmouga3rqiq
Combined GNSS/SLAM-Based High Accuracy Indoor Dynamic Target Localization Method
2021
Wireless Communications and Mobile Computing
To address the problems of scale drift and frequent initialization due to environmental factors in monocular vision SLAM, an Ultra Wideband (UWB)/vision fusion localization model that takes into account ...
Navigation Satellite System/Simultaneous Localization and Mapping- (GNSS/SLAM-) based high-precision indoor dynamic target localization method is proposed. ...
Based Wireless Communications and Mobile Computing on the principle of quadrant distribution of the 3D spatial coordinate system, it can be divided into 8 subspaces. ...
doi:10.1155/2021/8380869
fatcat:vonsi5y4pnhxlkzl7vfadjugsi
A Survey on the Application of WirelessHART for Industrial Process Monitoring and Control
2021
Sensors
Industrialization has led to a huge demand for a network control system to monitor and control multi-loop processes with high effectiveness. ...
On the other hand, using IWSNs for process control comes with the critical challenge of handling stochastic network delays, packet drop, and external noises which are capable of degrading the controller ...
effects of using
wired and
WirelessHART
motes on the control
performance on
pilot process plant
Table 7 . 7 Cont. ...
doi:10.3390/s21154951
fatcat:t5ubx7sq3na6hbbvsntbjpne2e
Exploring Cross-layer techniques for Security: Challenges and Opportunities in Wireless Networks
2007
MILCOM 2007 - IEEE Military Communications Conference
Here, we investigate the impact of cross-layer techniques on security and network performance. ...
In this paper, we discuss the challenges and opportunities of using cross-layer techniques for enhancing wireless network security. ...
creation of adaptation loops in the system. ...
doi:10.1109/milcom.2007.4454962
fatcat:jxnhzq2idnbx3p7monmcljru2y
A WSNs-based Approach and System for Mobile Robot Navigation
[chapter]
2010
Robot Localization and Map Building
Thus, we can effectively avoid falling into the loop. ...
On-line path planning Now we adopt the on-line path planning method described above to study the performance of the system. ...
effectively. ...
doi:10.5772/9259
fatcat:ret5oqtrzrfgdg2p4tqf6xqcqi
« Previous
Showing results 1 — 15 out of 16,189 results