Filters








35,824 Hits in 3.5 sec

A Novel Product Representation to Highlight Cross-assembly Dependencies and Product Robustness

Blake A. Kendrick, Stephen T. Newman, Vimal Dhokia
2014 Procedia CIRP  
Manufacturing industry has traditionally used Bill of Materials (BOMs) and Product Lifecycle Management (PLM) tools to track components and sub-assemblies within a product.  ...  Here, a disconnection between Design Engineering and Production Engineering after design finalisation has been determined and a solution presented.  ...  Acknowledgment The authors would like to thank Renishaw production and design teams, in particular Mr. Ben Altwasser, for their support and suggestions.  ... 
doi:10.1016/j.procir.2014.10.009 fatcat:x7ibj6cjqvbrvgoo4yeeaqxlsu

A Solution with Security Concern for RFID-Based Track & Trace Services in EPCglobal-Enabled Supply [chapter]

Wei He, Yingjiu Li, Kevin Chiew, Tieyan Li, Eng Wah
2011 Designing and Deploying RFID Applications  
We have shown that our solution can achieve secure information flow control for product track & trace services. We have also implemented a prototype of our solution for OM processes.  ...  The major components of the COT model consist of a trust algorithm, a trust model for two participants, a trust model of graph-based circle for multiple participants, and their control logic.  ...  A Solution with Security Concern for RFID-Based Track & Trace Services in EPCglobal-Enabled Supply, Designing and Deploying RFID Applications, Dr.  ... 
doi:10.5772/16624 fatcat:xa2glj55k5ebxh5ttlaaca5k7m

Data Architectures for RFID Transactions

Suresh Chalasani, Rajendra V. Boppana
2007 IEEE Transactions on Industrial Informatics  
The results presented in this paper will help a practitioner to 1) design and develop databases and applications for handling RFID data and 2) significantly reduce the storage requirements of RFID data  ...  We consider the supply chain comprised of the manufacturer, distributor, retailer, and the consumer. We discuss details of the data generated by RFID transactions and data models to store such data.  ...  ACKNOWLEDGMENT The authors would like to thank the anonymous reviewers whose suggestions helped improve the quality of this paper.  ... 
doi:10.1109/tii.2007.904147 fatcat:bu7rsab6vnetlbxujp7gxqtho4

RFID-enabled complex event processing application framework for manufacturing

Ji Fang, George Q. Huang, Ting Qu, YingFeng Zhang
2011 International Journal of Services Operations and Informatics  
This paper proposes an application framework for a real-time Complex Event Management System (CEMS) based on RFID equipments deployment.  ...  Through this way, all production data in manufacturing fields can be obtained in real time, and it improves the flexibility and responsivity to the changing market for the companies.  ...  The application of this system will enable manufacturing enterprise to implement distributed or complex workflow tracking and gain more accurate track and trace on product material and work in progress  ... 
doi:10.1504/ijsoi.2011.038313 fatcat:q57dhhkzqzbpllad5tnyfcl6c4

Cloud Computing Solution and Services for RFID Based Supply Chain Management

S. M. Khalid Jamal, A. Omer, Asiya Abdus Salam Qureshi
2013 Advances in Internet of Things  
Deploying and Implementing RFID Systems for tracking and controlling products in supply chain management is not affordable for small and midsized companies due to its complexity, cost, and difficulties  ...  Cloud computing can be used to mitigate the risks associated with the implementation and deployment of RFID based on system in supply chain management because the complex system for data filtering, management  ...  Cloud-base services are designed in such a way as to eliminate the hardware and software infrastructure requirements whose implementation is time consuming as well as expensive.  ... 
doi:10.4236/ait.2013.34011 fatcat:xoz5pne53fgc3eskzepckwyylu

Integrated Designing of Production Systems on the Physical and Virtual Modelling Base

Jozef Kováč, Vladimír Rudy, Albert Mareš, Juraj Kováč, Peter Malega
2012 Acta Mechanica Slovaca  
ABSTRACT Integrated designing of production systems on the physical and virtual modelling base is added in specific goal 3: Designing innovation and implementation of production system, high-tech products  ...  His professional activities are oriented on the analysis and development of new methods and practices of integrated design of manufacturing systems and testing of design solutions.  ...  It is defined acceptable solutions and excluded the inappropriate variants of solution for production system either on the base of the intuitive approach, respectively on the base of usage of logical  ... 
doi:10.21496/ams.2012.004 fatcat:tkdyczfolnennleideggyhl3vy

MODEL-BASED DESIGN OF AM COMPONENTS TO ENABLE DECENTRALIZED DIGITAL MANUFACTURING SYSTEMS

Olivia Borgue, John Stavridis, Tomas Vannucci, Panagiotis Stavropoulos, Harry Bikas, Rosa Di Falco, Lars Nyborg
2021 Proceedings of the Design Society  
In this article, a design strategy is proposed to integrate the different phases of the development process into a model-based design platform for decentralized manufacturing.  ...  However, the wide adoption of additive manufacturing technologies is hindered by the lack of experience on its implementation, the lack of repeatability among different manufacturers and a lack of integrated  ...  ACKNOWLEDGEMENTS The authors gratefully acknowledge the financial support from the EIT (European Institute of Innovation and Technology) Manufacturing and the companies participating on the DIGIQUAM project  ... 
doi:10.1017/pds.2021.474 fatcat:fg7abhz3mzg5nagd32zo6hv5pa

Yield-enhanced routing for high-performance VLSI designs

Arunshankar Venkataraman, Howard H. Chen, Israel Koren, Ali Keshavarzi, Sharad Prasad, Hans-Dieter Hartmann
1997 Microelectronic Manufacturing Yield, Reliability, and Failure Analysis III  
Recently, several channel-routing based solutions have been proposed to minimize crosstalk noise and also enhance yield of the routing.  ...  Interconnects are more susceptible to manufacturing defects and therefore affect the product yields significantly.  ...  Therefore, Design For Manufacturability (DFM) assumes a lot of significance and present day designers are taking these issues into account while developing newer designs.  ... 
doi:10.1117/12.284707 fatcat:7xorupj3yvbwldp3xvyf7ouo6y

Intellectual Property Metering [chapter]

Farinaz Koushanfar, Gang Qu, Miodrag Potkonjak
2001 Lecture Notes in Computer Science  
The effectiveness of the metering scheme is demonstrated on a number of designs and programs.  ...  We have developed the first hardware and software (intellectual property) metering scheme that enables reliable low overhead proofs for the number of manufactured parts and copied programs.  ...  The utilizes a small percentage of a design implemented using configurable technology to embed a unique ID to each manufactured design instance.  ... 
doi:10.1007/3-540-45496-9_7 fatcat:w6fjm5nyvbf63lbnmn6j3gfbfy

Empowering Artificial Intelligence and Cyber Security Challenges in Smart Manufacturing

Dr.P. KALARANI
2021 Turkish Journal of Computer and Mathematics Education  
SM (Smart Manufacturing) is a broad category of manufacturing that employs a computer-based integrated manufacturing system, with a higher end of new adaptability and quick change in design structure,  ...  The proposed work employs a Dual stage ANN to find the design configuration of SM systems in industries.  ...  The fusion of several technologies like communication, intelligent-based, product-based technology in manufacturing industries is considered as a game-changer in that sector in terms of a new approach  ... 
doi:10.17762/turcomat.v12i6.1280 fatcat:dvenwug6pzccrgmpx7nyhdkksu

Leveraging Knowledge Representation to Maintain Immunization Clinical Decision Support

Janos L Mathe, Scott D Nelson, Stuart T Weinberg, Christoph U Lehmann, Andras Nadas, Asli O Weitkamp
2018 AMIA Annual Symposium Proceedings  
We demonstrate the creation of a tool that enables content curators to visualize, track, and implement immunization changes.  ...  The implemented features include error and change tracking, content discovery and analytics, and tracking of dependencies to dependent downstream CISs.  ...  Additionally, model-based design tools typically facilitate automated synthesis of implementation directly from the models (such as system and configuration generation) and support design evolution.  ... 
pmid:30815121 pmcid:PMC6371352 fatcat:6bzgltbl7rcypjguruszja4f5u

Digital Twin-Assisted Controlling of AGVs in Flexible Manufacturing Environments [article]

Mohammad Azangoo
2021 arXiv   pre-print
Formal techniques, such as graphs, are a common way of describing Digital Twin models, allowing broad types of tools to provide Digital Twin based services such as fault detection in production lines.  ...  Obtaining correct and complete formal Digital Twins of physical systems can be a complicated and time consuming process, particularly for manufacturing systems with plenty of physical objects and the associated  ...  and real systems to setup the Digital Twins. 4) Connect graph based Digital Twins for different subsystems to make a comprehensive Digital Twin for the whole factory floor. 5) Implement and run added-value  ... 
arXiv:2112.01367v1 fatcat:nft33t4uvzchvp46lixe5hwgvq

Integration of manufacturing-induced properties in product design

Peter Groche, Wolfram Schmitt, Andrea Bohn, Sebastian Gramlich, Stefan Ulbrich, Ute Günther
2012 CIRP annals  
Acknowledgements The investigations presented in this paper were carried out within the research projects A1, A2, A3, B1, B4 and D1 of the Collaborative Research Centre 666 'Integral sheet metal design  ...  The authors thank the German Research Foundation (DFG) for founding and supporting the CRC 666.  ...  Such kinds of guidelines are summarized in different approaches of ''Design for X'' (DfX) like ''Design for Manufacturing'' (DfM) [15] and ''Design for Forming'' [16] .  ... 
doi:10.1016/j.cirp.2012.03.041 fatcat:4gowyrqpojhhlf4zyzut35zno4

Analysis of asset location data to support decisions in production management and control

Dávid Gyulai, András Pfeiffer, Júlia Bergmann
2020 Procedia CIRP  
Moreover, a hybrid functional and physical architecture graph (HyFPAG) is the output which depicts the similarity between product families by providing design support to both, production system planners  ...  and product designers.  ...  The authors would like to thank the MTA Cloud (https://cloud.mta.hu) for providing the cloud infrastructure of the project that was used to implement the analytics applications and perform the computational  ... 
doi:10.1016/j.procir.2020.05.035 fatcat:vta5rcyriffvdpumovmt7sjp3m

Powering flexible manufacturing systems with intelligent contact-less power transfer

M. Budhia, V. Vyatkin, G. A. Covic
2008 2008 6th IEEE International Conference on Industrial Informatics  
A greedy heuristic (IEC 61499 compliant) scheduler is implemented to optimize the production schedule based on the level of charge.  ...  In order to increase the cost effectiveness of the design, each module will run for an eight hour shift using a battery which is then automatically recharged via IPT.  ...  These were, investigate wireless power transfer techniques, develop design specifications for a wireless system, make the module energy aware, implement the solutions on the module and consider safety  ... 
doi:10.1109/indin.2008.4618278 fatcat:o3esc2yvdfcrvhgxvheaaduxym
« Previous Showing results 1 — 15 out of 35,824 results