536 Hits in 4.0 sec

Integrated development and maintenance for the release, delivery, deployment, and customization of product software: a case study in mass-market ERP software

Slinger Jansen, Gerco Ballintijn, Sjaak Brinkkemper, Arco van Nieuwland
2006 Journal of Software Maintenance and Evolution Research and Practice  
This article presents a case study of a product software vendor that tries to reduce this complexity by integrating product data management (PDM), software configuration management (SCM), and customer  ...  The maintenance of enterprise application software at a customer site is a complex task for software vendors. This complexity results in a significant amount of work and risk.  ...  Also, the authors thank Marcel van de Sandt and Marco van Dijk from ES for carefully reviewing and correcting important details.  ... 
doi:10.1002/smr.330 fatcat:gfzyrxrzozagpkqc5hf2gx3f4u

Integrated development and maintenance of software products to support efficient updating of customer configurations: a case study in mass market ERP software

S. Jansen, S. Brinkkemper, G. Ballintijn, A. van Nieuwland
2005 21st IEEE International Conference on Software Maintenance (ICSM'05)  
This paper presents a case study of a product software vendor that tries to reduce this complexity by integrating product data management (PDM), software configuration management (SCM), and customer relationship  ...  This complexity can unfortunately result in a significant amount of work and risk.  ...  Finally, thanks go to Tijs van der Storm, Vedran Bilanovic, and Paul Klint for their discussions and preliminary reviews of our paper.  ... 
doi:10.1109/icsm.2005.56 dblp:conf/icsm/JansenBBN05 fatcat:22trw4bo6rep5ldih5ibczh52y

Model data management

Jad El-khoury
2005 Proceedings of the 12th international workshop on Software configuration management - SCM '05  
Software Configuration Management and Product Data Management systems have been developed independently, but recently the need to integrate them to support multidisciplinary development environments has  ...  An architecture for a Model Data Management system that supports model-based development is presented.  ...  For example, software development might require the complex version control mechanisms and concurrent development normally provided by SCM systems, while hardware development is satisfied with sequential  ... 
doi:10.1145/1109128.1109130 dblp:conf/scm/El-khoury05 fatcat:cqskftjc65cm3afkuspxcrobsm

Towards PLM for Mechatronics System Design Using Concurrent Software Versioning Principles [chapter]

Matthieu Bricogne, Louis Rivest, Nadège Troussier, Benoît Eynard
2012 IFIP Advances in Information and Communication Technology  
Based on their comparison results, this paper discusses branching / merging concepts and presents them as an opportunity for PDM improvements.  ...  In this paper, the Change Management (CM) and version control mechanisms used in the mechanical and software domains are presented respectively in the Product Lifecycle Management (PLM) and Application  ...  These integrated systems are called mechatronic systems [1] . To design such systems, Product Data Management (PDM) systems can in assist multiple-discipline integration.  ... 
doi:10.1007/978-3-642-35758-9_30 fatcat:afpbv4iqpfa45nxcvgpazpbl6u

Toward SCM/PDM integration? [chapter]

Jacky Estublier, Jean -Marie Favre, Philippe Morat
1998 Lecture Notes in Computer Science  
For SCM, we have selected ClearCase because it is a leader of the SCM market, and our system Adele, because, for almost 2 decades, it has been among the leaders of the SCM research field, and the product  ...  This paper is written by SCM experts, not PDM ones, and assumes that readers are more knowledgeable in SCM than PDM.  ...  4 The evolution model SCM as well as PDM can be defined as the control of the evolution of complex systems [35] .  ... 
doi:10.1007/bfb0053880 fatcat:6fbckqftgrfvpmpdw22tifs644

Enabling system evolution through configuration management on the hardware/software boundary

René Krikhaar, Wim Mosterman, Niels Veerman, Chris Verhoef
2009 Systems Engineering  
But, as the usage, flexibility and complexity of software and electronics increases, and fierce competition requires shorter time-to-market and customizable products, more frequent releases of integrated  ...  To properly enable the evolution of integrated hardware/software systems, adequate configuration management is required in both disciplines.  ...  We thank all the involved companies for their stimulating discussions and kind cooperation. We also thank all anonymous reviewers for their valuable comments and suggestions for improvements.  ... 
doi:10.1002/sys.20122 fatcat:4f6ip4qeqfhtto3h5tqlkrebpa

Reconciling software configuration management and product data management

Jacky Estublier, German Vega
2007 Proceedings of the the 6th joint meeting of the European software engineering conference and the ACM SIGSOFT symposium on The foundations of software engineering - ESEC-FSE '07  
Product Data Management (PDM) and Software Configuration Management (SCM) are the disciplines of building and controlling the evolution of a complex artifacts; either physical or software.  ...  We have developed a system, called CADSE (Computer Aided Domain Specific Environment), in which a product (software, physical or both) is modeled in a way similar to PDM and in which concurrent engineering  ...  Reconciling PDM and SCM therefore requires supporting high level modeling and concurrent engineering.  ... 
doi:10.1145/1287624.1287662 dblp:conf/sigsoft/EstublierV07 fatcat:b3e3vwjijnenpbrh426hzxn374

A Holistic Management Model for Manufacturing Companies and Related IT Support

Stefan Silcher, Barbara Seeberg, Erich Zahn, Bernhard Mitschang
2013 Procedia CIRP  
We focus on Product Lifecycle Management (PLM), Supply Chain Management and Factory Lifecycle Management to integrate them into a holistic management model.  ...  In this paper we review different concepts and their similarities and differences are discussed.  ...  It fits the situation of dynamic complexity and interprets the production system as an adaptive system in the sense of complex adaptive systems [16] .  ... 
doi:10.1016/j.procir.2013.05.030 fatcat:awdaeiy5fvh3bd5xuaalsa2ugm

Meta-Model of PLM for Design of Systems of Systems [chapter]

Peter Hehenberger, Matthieu Bricogne, Julien Le Duigou, Benoit Eynard
2016 IFIP Advances in Information and Communication Technology  
Mechatronic System Design involves close examination and further development of design methods, design processes, models and tools.  ...  The current trend in mechatronics involves networked mechatronic systems, or cyber physical systems (CPS), which can also be considered as a sub-part of Systems of Systems (SoS).  ...  This work has been partially supported by the Linz Center of Mechatronics (LCM) in the framework of the Austrian COMET-K2 program and the Labex MS2T at the Université de Technologie de Compiègne.  ... 
doi:10.1007/978-3-319-33111-9_28 fatcat:gifrpof42ngfnktwmka4b7nwye

Integration of Virtualized Environments in PDM Systems for Embedded Software Product Development

Michael Hopf, Jivka Ovtcharova
2013 Procedia CIRP  
This paper shows an architectural approach, and how to perform an integration of virtualization software in PDM systems.  ...  In the context of PLM, virtualization can support crucial stages of the product development and test automation by providing virtual environments.  ...  [7] discussed the integration of Product Lifecycle Management (PLM) and SCM systems and the role of these systems to be applied during the development and maintenance.  ... 
doi:10.1016/j.procir.2013.07.014 fatcat:h5g5nd4svjaxlh5cq7wgq5vb24

A Framework For Product Development Process Including Hw And Sw Components

Namchul Do, Gyeongseok Chae
2007 Zenodo  
The framework is applied to development of a robot system in order to show its effectiveness.  ...  In order to support efficient integration of the two different hardware and software development, a modified product development process is proposed.  ...  Currently we are developing an extension of PDM system that implements SCM features such as source code comparisons.  ... 
doi:10.5281/zenodo.1334092 fatcat:7f67mc767vd6vhdllavrnuzohy

Software configuration management

Jacky Estublier
2000 Proceedings of the conference on The future of Software engineering - ICSE '00  
Chapter 2 shows the current issues and current research work under way in the area. In chapter 3, the challenges SCM has to take up, as well as SCM future research are discussed.  ...  This paper, in the first chapter summarizes the state of the art in SCM, showing the evolution along the last 25 years.  ...  There is fundamental work to do to make PSSs interoperate in a clear and clean way. PDM vs. SCM The definition of SCM says "the control of the evolution of complex systems".  ... 
doi:10.1145/336512.336576 dblp:conf/icse/Estublier00 fatcat:mammajkcunaxzc7prqtndhhzcq


Carina Fresemann, Max Falbe, Rainer Stark
2021 Proceedings of the Design Society  
AbstractBoth industry and science point out the need to integrate PLM and ALM since products evolve from mechatronic to smart products.  ...  Particularly, the differences and commonalities in design evolution management of the software and hardware disciplines are considered.This paper introduces a beta version of a hash function based tool  ...  SCM is the discipline of managing the evolution of large and complex software systems (Conradi (1998) ).  ... 
doi:10.1017/pds.2021.431 fatcat:mvqydyc7xzbnje7slnoug2adcu

Computer aided acquisition and logistic support

M. Petruf, L. Madarasz, J. Kolesar
2011 3rd IEEE International Symposium on Logistics and Industrial Informatics  
Acquisition of the most modern technical systems and their logistical support requires innovative approaches to be adopted in design, manufacturing and providing logistical services for their operation  ...  Integrated logistical support provided through electronization of design and operational documentation linked with standardization and continuous upgrade is yielding surprising benefits.  ...  ACKNOWLEDGEMENTS This article was written with the support of the project VEGA No.1/1117/11 -Integration of algorithms, automatic flight control and control air turbo compressor engines and project KEGA  ... 
doi:10.1109/lindi.2011.6031156 fatcat:nkqgwnvpmjcwzdq6ol7iibzdt4

Integrated silicon-PDMS process for microrobot mechanisms

Aaron P Gerratt, Ivan Penskiy, Sarah Bergbreiter
2010 2010 IEEE International Conference on Robotics and Automation  
This process allows silicon and poly(dimethylsiloxane) (PDMS) features to be defined in-plane with feature sizes down to 2 µm.  ...  The first MEMS process integrating soft elastomers in a standard silicon-on-insulator (SOI) wafer without assembly has been demonstrated for use in microrobotic mechanisms.  ...  As the number of different mobility methods and mechanism complexity increases, microfabrication techniques have also had to evolve and be developed to support the complex requirements of these microrobots  ... 
doi:10.1109/robot.2010.5509653 dblp:conf/icra/GerrattPB10 fatcat:zy4efhgoqncl5mdggmliongppu
« Previous Showing results 1 — 15 out of 536 results