A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
Filters
An Analytics Environment Architecture for Industrial Cyber-Physical Systems Big Data Solutions
2021
Sensors
Preserved Fulltext
The architecture design of industrial data analytics system addresses industrial process challenges and the design phase of the industrial Big Data management drivers that consider the novel paradigm in ...
An attribute driven design (ADD) approach has been adopted for architectural design gathering requirements from smart production planning, manufacturing process monitoring, and active preventive maintenance ...
Conflicts of Interest: The authors declare no conflict of interest. ...
doi:10.3390/s21134282
pmid:34201541
fatcat:vmoo3gfvd5ay5mlysrz6kdfwwa
A Framework of Energy Consumption Modelling for Additive Manufacturing Using Internet of Things
2017
Procedia CIRP
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
Although AM systems tend to become increasingly automated, the issue of energy consumption still attracts attention, even in the Industry 4.0 era, and is related to many processing factors depending on ...
Although AM systems tend to become increasingly automated, the issue of energy consumption still attracts attention, even in the Industry 4.0 era, and is related to many processing factors depending on ...
Finally, the defined energy reduction control signals are set as the input to processing control system. ...
doi:10.1016/j.procir.2017.02.036
fatcat:ewbxzcnam5garg3ytpyihhkdau
Flexible Manufacturing System and its feasibility in context of Manufacturing Industries
2020
INTERNATIONAL JOURNAL OF ADVANCED PRODUCTION AND INDUSTRIAL ENGINEERING
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
Operational issues related to FMS faced by industries are machine loading, scheduling and dispatching, part routing, tool management, and part grouping so there is much scope of future development of FMS ...
Highly automated machine cell which is based on the principle of Group technology, comprising a group of processing work station for the production is referred to as Flexible Manufacturing System (FMS) ...
In this system we use Automatic Material Handling system, Computer Numeric Control machine tools, Automated Storage, and Retrieval System (AS/RS) to perform the different types of operation. ...
doi:10.35121/ijapie202004249
fatcat:6cbddxrmwzeapdijwsn2ptilj4
Platform for Intelligent Manufacturing Systems with Elements of Knowledge Discovery
[chapter]
2012
Manufacturing System
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
machines' control systems. ...
The first section includes machines without PLC controllers but the second one consists of 12 modern machines equipped with PLCs and advanced cold forge process monitoring devices. ...
Manufacturing system comprise of equipment, products, people, information, control and support functions for the competitive development to satisfy market needs. ...
doi:10.5772/35095
fatcat:piij7zokhvbe5axgoq7bjg6psu
Determination of Changes in Process Management within Industry 4.0
2019
Procedia Manufacturing
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
The basic of flexibility is quick respond to customer requirements and well-set and controlled production processes. ...
The basic of flexibility is quick respond to customer requirements and well-set and controlled production processes. ...
Another change is in attribute of customer, customer can be person but also machine or manage cyber-physical system (CPS). ...
doi:10.1016/j.promfg.2020.01.112
fatcat:uhzalstwdjc4bogujj5fj5scgu
Social Production System: A Three-layer Smart Framework for Implementing Autonomous Human-machine Collaborations in A Shop Floor
2021
IEEE Access
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
Furthermore, to validate the proposed Social-PS framework, a software and hardware integrated prototype system is implemented to demonstrate the knowledgedriven human-machine collaboration of the production ...
process, which provides a basis for realizing smart and autonomous production collaboration. ...
summarized the application of CPS in the manufacturing industry and proposed the concept of cyber-physical production systems (CPPS) [13] . ...
doi:10.1109/access.2021.3050236
fatcat:aowgttz22vakbgmiud6pkwbzwq
Enhancing a Virtual SCADA Laboratory Using Simulink
[chapter]
2015
IFIP Advances in Information and Communication Technology
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
The laboratory was initially constructed using virtual devices written in Python that simulate industrial processes, emulate control system ladder logic functionality and utilize control system communications ...
However, given the limitations of Python programs with regard to modeling industrial processes, an improved model was constructed using the Simulink modeling environment. ...
A human-machine interface is needed by a human operator of an industrial control system to visualize the changing process and interface with the control system. ...
doi:10.1007/978-3-319-26567-4_8
fatcat:kqm5bioukbbrfdqucmdqjwjsgy
An Information Model for Process Control on Machine Tools
[chapter]
2010
Advances in Intelligent and Soft Computing
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The solution to this problem is the development of a machine tool process control system which would be able to provide the corrective measures in-process. ...
A computational platform for developing a machine tool process control system has then been discussed. ...
Acknowledgements The work reported in this paper has been supported by a number of grants for Engineering and Physical Sciences Research Council (EPSRC), involving a large number of industrial collaborators ...
doi:10.1007/978-3-642-10430-5_118
dblp:conf/det/KumarNNVT09
fatcat:2m4s5ele4rglxbzvule6izws2q
Toward virtual biopsy through an all fiber optic ultrasonic miniaturized transducer: a proposal
2003
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
sizing ............Optimized production technology ............Scheduling ....Integrated manufacturing systems ....Machine control ........Machine vector control ....Manufacturing automation ........Computer ...
Aerospace and electronic systems ....Aerospace control ........Air traffic control ........Attitude control ........Ground support ....Aerospace engineering ........Aerospace biophysics ........Aerospace ...
doi:10.1109/tuffc.2003.1244749
fatcat:l3jre4etsvcqzfyz2jqggji3gy
Industry 4.0: Technology Mapping and the importance of Cognitive Ergonomics
2019
International Journal of Advanced engineering Management and Science
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Industry 4.0 attributes pointed to an increasing industry complexity during a technological virtualization process, requiring faster and assertive decisions in the face of a wide range of information. ...
The fourth industrial revolution brings a new paradigm, based on advanced manufacturing and industrial internet. So much has been debated about the knowledge and skills of Operator 4.0. ...
machines, industry facilities, and storage systems that to be able to exchange information and make decisions independently from controllers [2] . ...
doi:10.22161/ijaems.5.5.1
fatcat:bvskowyoxvgc3aq76h7i2ajm24
A Manufacturing Planning and Execution Software Integration Architecture
[chapter]
1998
Globalization of Manufacturing in the Digital Communications Era of the 21st Century
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
Industries require these functions to be able to plug and play with other related manufacturing applications, such as design, resource planning, production scheduling, and equipment control. ...
Based on the activity models for process planning and manufacturing execution, a set of foundation interfaces has been developed to cope with the problem. ...
A6 -Control Equipment and Process Using pre-programmed instructions, control and monitor equipment motions and processes in real time. ...
doi:10.1007/978-0-387-35351-7_29
fatcat:bw3pwjwc4vgnxhzaso73atcbqy
An Expert System for Plasma Cutting Process Quality Prediction and Optimal Parameter Suggestion
[chapter]
2001
Global Engineering, Manufacturing and Enterprise Networks
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
An hybrid expert system, which uses both rule-based reasoning and statistical modelling, is developed for prediction of cut quality and suggestion of optimal process parameter settings for CNC controlled ...
A scheme for cutting quality definition and practical method of assessment have been developed which incorporate both the quantitative requirements for each quality attribute and their respective relative ...
Difficulty in quality control is one of the factors which affect the wide spread use of the plasma cutting process in industry. ...
doi:10.1007/978-0-387-35412-5_51
fatcat:dmnstywaujacdmslvonl7gxndq
Data analytics for energy consumption of digital manufacturing systems using Internet of Things method
2017
2017 13th IEEE Conference on Automation Science and Engineering (CASE)
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
The topic of 'Industry 4.0' has become increasingly popular in manufacturing and academia since it was first published. ...
Although modern digital manufacturing systems are becoming increasingly automated, the issue of sustainability still attracts attention, and is related to many processing factors that are present in a ...
In the cloud, data set from different machines, systems, and production processes are integrated. ...
doi:10.1109/coase.2017.8256150
dblp:conf/case/QinLG17
fatcat:efhelk5zqfdn5j2tey4s4l44xq
Anomaly Detection in ICS Datasets with Machine Learning Algorithms
2021
Computer systems science and engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
An Intrusion Detection System (IDS) provides a front-line defense mechanism for the Industrial Control System (ICS) dedicated to keeping the process operations running continuously for 24 hours in a day ...
A well-known ICS is the Supervisory Control and Data Acquisition (SCADA) system. ...
Introduction Control system is defined as the hardware and software component of an Industrial Automation and Control System (IACS). ...
doi:10.32604/csse.2021.014384
fatcat:3o5l4rgvdngmpmonxmbb4d7foq
Industry 4.0 and Object-Oriented Development: Incremental and Architectural Change
2016
Journal of Technology Management & Innovation
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
This integration of systems so different in nature aims to create context-aware factories in which people and machines are in real-time alignment. ...
Industry 4.0 in manufacturing is about combining cyber-physical systems with industrial automation systems. ...
The communication among Industry 4.0 components, machines and humans, relies on context-aware systems rather than on centralized control of production. ...
doi:10.4067/s0718-27242016000200010
fatcat:m7llz7jt6fbvzhlwfjvrk2jp3i
« Previous
Showing results 1 — 15 out of 261,676 results