Filters








290,865 Hits in 9.2 sec

Applying Multi-level Modeling to Data Integration in Product Line Engineering

Damir Nesic, Mattias Nyberg
2017 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems  
This paper reports on the experiences from applying the Multi-Level conceptual Theory (MLT), to the problem of information modeling for data integration in the PLE context.  ...  Developing systems according to the Product Line Engineering (PLE) paradigm is a process in which different types of engineering artifacts are created with the aim of reusing them in different configurations  ...  Basic idea behind the Product Line Engineering development paradigm Fig. 3 . 3 Fig. 3. MLT information model for LD-based data integration  ... 
dblp:conf/models/NesicN17 fatcat:f2je5llvrrat7fjnohwqafxvha

Extractive Multi Product-Line Engineering [article]

Kamil Rosiak
2021 arXiv   pre-print
We propose an approach to re-engineer intra-system and inter-system clones into reusable, configurable components stored in an integrated platform and synthesize a matching multi-layer feature model.  ...  This thesis proposes an extractive multi product-line engineering approach to re-establish the sustainable development of software variants.  ...  Extractive multi product-line engineering enables systems to be re-engineered and transitioned from ad-hoc reuse with clone-and-own to multi product-line engineering with an integrated platform [24] .  ... 
arXiv:2104.05602v1 fatcat:45yctvw7svey7bdbr4grixqg2i

Zero Defect Manufacturing Strategies for Reduction of Scrap and Inspection Effort in Multi-stage Production Systems

Florian Eger, Daniel Coupek, Davide Caputo, Marcello Colledani, Mariluz Penalva, Jon Ander Ortiz, Hermann Freiberger, Gernot Kollegger
2018 Procedia CIRP  
Multi-stage production systems offer a huge potential for defect compensation and defect propagation avoidance on system level, in contrast to current single-stage solutions, in order to reduce scrap and  ...  The presented strategies are validated in three emerging European industrial sectors (aerospace, railway and medical) yielding a universal solution for zero defect manufacturing in multistage production  ...  Integration in production and equipment control system The control system must be distributed, multi-level and allow human-in-the-loop integration, in order to realize the defect avoidance and propagation  ... 
doi:10.1016/j.procir.2017.12.228 fatcat:c27f443wjjdkxdy3vwyh6hlxym

Reference architecture for the industrial implementation of Zero-Defect Manufacturing strategies

Maria Chiara Magnanini, Marcello Colledani, Davide Caputo
2020 Procedia CIRP  
ZDM-strategies ground on the gathering of production and quality data from heterogeneous sources and on their integration with information at multiple factory levels.  ...  ZDM-strategies ground on the gathering of production and quality data from heterogeneous sources and on their integration with information at multiple factory levels.  ...  In fact, the real-time data gathered through the multi-source multi-sensor network are analysed and used to build process-level and system-level models to design ZDM strategies that are returned to the  ... 
doi:10.1016/j.procir.2020.05.154 fatcat:xa7ucgrbyzc7dlhhok653kgxdi

Dual deep modeling: multi-level modeling with dual potencies and its formalization in F-Logic

Bernd Neumayr, Christoph G. Schuetz, Manfred A. Jeusfeld, Michael Schrefl
2016 Journal of Software and Systems Modeling  
Multi-level modeling facilitates the definition and maintenance of such an integrated conceptual data model in a dynamic environment of changing data requirements of diverse applications.  ...  An enterprise database contains a global, integrated, and consistent representation of a company's data.  ...  any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.  ... 
doi:10.1007/s10270-016-0519-z pmid:29449797 pmcid:PMC5807479 fatcat:iaqkwrcepngz5opsklmuj3l5pe

Development of Requirements for a Multifunctional Chassis Machine Using System Engineering

D. A. Popov
2020 KnE Engineering  
The article describes how to properly formulate requirements when creating a product. Categories of requirements. Requirements management.  ...  Formation of the requirements of the source, target and system using system engineering using the example of a multifunctional chassis machine, the main subsystems of product requirements are also described  ...  The development of a multi-domain architectural model in SMW is based on the ARCADIA methodology developed by TALES to solve their internal engineering problems.The development of the architecture according  ... 
doi:10.18502/keg.v5i3.6777 fatcat:6sronywoyrbnphv4fbbzngof5y

Innovative Digital Manufacturing Curriculum for Industry 4.0

Rapeepan Promyoo, Shashank Alai, Hazim El-Mounayri
2019 Procedia Manufacturing  
of modelling and simulation continuum, in the form of Model-based Systems Engineering (MBSE), with Product lifecycle management (PLM).  ...  of modelling and simulation continuum, in the form of Model-based Systems Engineering (MBSE), with Product lifecycle management (PLM).  ...  MPP enables user to manage manufacturing data, process, resource, and plant information in an integrated product and production lifecycle environment.  ... 
doi:10.1016/j.promfg.2019.06.092 fatcat:ctv6272m7rfq5lzb6bttb4ilry

Digital Factory - Simulation Enhancing the Product and Production Engineering Process

Wolfgang Kuhn
2006 Proceedings of the 2006 Winter Simulation Conference  
Different types of simulation, such as discrete event or 3Dmotion simulation can be applied in virtual models on various planning levels and stages to improve the product and process planning on all levels  ...  In an advanced stage simulation technology can be applied in the digital factory concept to enhance the operative production planning and control as an integrated process from the top level to the factory  ...  Simulation is a very important key technology in the over all concept and can be applied in virtual models on various planning levels and stages to improve the product and process planning.  ... 
doi:10.1109/wsc.2006.322972 dblp:conf/wsc/Kuhn06 fatcat:442eo7wgx5cvxans3dansbl554

Future challenges for software data collection and analysis

Barry Boehm
2009 Proceedings of the 5th International Conference on Predictor Models in Software Engineering - PROMISE '09  
• Systems engineering: COSYSMO • Multi-organization development costing • Lead Systems integrator costing • Requirements volatility effects • Integration&test: new cost drivers Model-Driven  ...  Very High Some in place Related experience, med - high Full ICM; Full stakeholder participation in product line scoping.  ...  Conclusions • Future trends imply need to concurrently address new estimation and management metrics challenges  ... 
doi:10.1145/1540438.1540440 dblp:conf/promise/Boehm09 fatcat:whpd72k27nc2dhrjlwcg42rn5u

Framework for Evaluating the Version Management Capabilities of a Class of UML Modeling Tools from the Viewpoint of Multi-Site, Multi-Partner Product Line Organizations

Mervi Koivulahti-Ojala, Timo Kakola
2010 2010 43rd Hawaii International Conference on System Sciences  
UML models are widely used in software product line engineering for activities such as modeling the software product line reference architecture, detailed design, and automation of software code generation  ...  This article's contribution is a framework for evaluating the version management features of UML modeling tools for multi-site, multi-partner software product line organizations.  ...  Therefore, this paper will analyze in more depth version management related to product line modeling in multi-site, multi-partner organizations.  ... 
doi:10.1109/hicss.2010.213 dblp:conf/hicss/Koivulahti-OjalaK10 fatcat:6ditx2ocsvbirjptxcj4uw2ao4

Moving toward the digital factory in raw material resources area

Miroslav Zelko, Anton Lavrin, Anton Lavrin, Miroslav Zelko
2010 Acta Montanistica Slovaca  
The ICT contribution to these initiatives should improvethe efficiency, adaptability and sustainability of production systems as well as their better integration within business processesin an increasingly  ...  Theseconcepts aims at helping EU manufacturing and mining enterprises, to adapt to global competitive pressures by improvingthe technological base of production across a broad range of sectors.  ...  Within this concept simulation is a key technology and can be applied in virtual models on various planning levels and stages to improve the product and process planning.  ... 
doaj:e31165e1a7b44cfab6dc29ebeccf2cda fatcat:hxlukaoy2rbapif2ispttloxm4

Multi-Scale Geometric-Semantic Modeling of Shield Tunnels for GIS and BIM Applications

A. Borrmann, T.H. Kolbe, A. Donaubauer, H. Steuer, J.R. Jubierre, M. Flurl
2014 Computer-Aided Civil and Infrastructure Engineering  
Based on a detailed analysis of the data modeling methods used in CityGML and the requirements present in the context of infrastructure planning projects, we discuss potential extensions to the BIM data  ...  While multi-scale modeling is already well established in the GIS field, there are no corresponding approaches in Infrastructure BIM so far.  ...  Combining the multi-scale semantic model with the procedural geometry description In order to realize a coherent multi-scale product model, the multi-scale semantic model presented in Section 5.2 has to  ... 
doi:10.1111/mice.12090 fatcat:dg3pmf2vdnggzn3oqrpgbcepmq

Preface to the 6th International Workshop on Multi-Level Modelling (MULTI 2019)

Joao-Paolo Alemeida, Adrian Rutle, Manuel Wimmer
2019 2019 ACM/IEEE 22nd International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C)  
The paper Applying Multi-Level Modeling to Data Integration in Product Line Engineering by Nesic and Nyberg describes how power-types can be used in product-lines to succinctly capture constraints such  ...  Such abstraction is key when aiming to achieve data integration through the definition of new language features whose property constraints apply across type levels.  ... 
doi:10.1109/models-c.2019.00015 dblp:conf/models/AlemeidaRW19 fatcat:kjshou3inrb7xfdww5rsjqwy3q

TRANSFERRING MULTI-SCALE APPROACHES FROM 3D CITY MODELING TO IFC-BASED TUNNEL MODELING

A. Borrmann, T. H. Kolbe, A. Donaubauer, H. Steuer, J. R. Jubierre
2013 ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences  
This applies not only to the visualization of city and building models, but in particular to their use in the context of planning and analysis tasks.  ...  potential extensions to the BIM data model Industry Foundation Classes (IFC).  ...  We are also very thankful for the support of the engineering consultancy company Obermeyer Planen und Beraten which provided valuable insight into current planning practices and data for a real-world case  ... 
doi:10.5194/isprsannals-ii-2-w1-75-2013 fatcat:ttyazxjpzvfq3o56ug53zorfnq

MUFINS: multi-formalism interaction network simulator

Huihai Wu, Axel von Kamp, Vytautas Leoncikas, Wataru Mori, Nilgun Sahin, Albert Gevorgyan, Catherine Linley, Marek Grabowski, Ahmad A Mannan, Nicholas Stoy, Graham R Stewart, Lara T Ward (+8 others)
2016 npj Systems Biology and Applications  
The current frontier is the integration of models expressed in different formalisms to address the multi-scale biological system organization challenge.  ...  MUFINS incorporates an extended version of our Quasi-Steady State Petri Net approach to integrate dynamic models with CBM, which we demonstrate through a dynamic model of cortisol signaling integrated  ...  We used this integrated model to simulate nitric oxide production in response to lipopolysaccharide (LPS).  ... 
doi:10.1038/npjsba.2016.32 pmid:28725480 pmcid:PMC5516860 fatcat:izvizo75yngp3f7hsgdtw7kiha
« Previous Showing results 1 — 15 out of 290,865 results