A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
Filters
INNOVATIONS FORUM : Engineered Cementitious Composites for Structural Applications
1998
Journal of materials in civil engineering
Preserved Fulltext
Many people have been involved in the development of ECCs and their applications, both in and outside of the ACE-MRL at the University of Michigan. ...
The research associated with ECC and its applications have been supported by a number of government agencies and industrial concerns. ...
Other applications of ECC being considered are in permanent formwork, extruded elements with structural properties, FRP reinforced concrete structures, and as a binder for radio-active waste treatment ...
doi:10.1061/(asce)0899-1561(1998)10:2(66)
fatcat:z5wfpm235zdjlp7vybsj6mjfsi
Numerical Simulation on Retrofitting in Roof Corner Joint Strengthened With FRP Using FEM Method
2017
International Journal for Research in Applied Science and Engineering Technology
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
The thesis involves the literature review of current experimental test of repair and strengthening techniques for reinforced concrete beams. ...
The comparison and summary of each repair and strengthening method are provided in this thesis. ...
INTRODUCTION The maintenance, rehabilitation and upgrading of structural members, is perhaps one of the most crucial problems in civil engineering applications. ...
doi:10.22214/ijraset.2017.2015
fatcat:hruznmja4vbqteoxvkwpdiukme
Polymer Composites in Construction: An Overview
2014
SOJ Materials Science & Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
Repair and rehabilitation of reinforced concrete (RC) columns was the first successful applications of FRP composites that were initiated in early 1990 (Figure 1 ). ...
A comprehensive coverage for different repair and rehabilitation applications of composites is reported by Mosallam AS [2] . ...
Also, the Japanese Society of Civil Engineers (JSCE) established a subcommittee on FRP Bridges was and has published in 2004 [55] a technical report titled "FRP bridges -technologies and their future ...
doi:10.15226/sojmse.2014.00107
fatcat:6xcvrjnbiva7tb4smvmbdftifi
Testing of Materials and Elements in Civil Engineering
2021
Materials
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
This issue is proposed and organized as a means to present recent developments in the field of testing of materials in civil engineering. ...
The current trend in the development of materials testing in civil engineering is mainly concerned with the detection of flaws and defects in elements and structures using destructive, semi-destructive ...
Institutional Review Board Statement: Not applicable. Informed Consent Statement: Not applicable.
Conflicts of Interest: The authors declare no conflict of interest. ...
doi:10.3390/ma14123412
fatcat:gl6ogahtnjhtndyaksouthytcq
Smart Sensing Technologies for Structural Health Monitoring of Civil Engineering Structures
2010
Advances in Civil Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
In this paper, the application of smart materials/sensors for the SHM of civil engineering structures is critically reviewed. ...
The major focus is on the evaluations of laboratory and field studies of smart materials/sensors in civil engineering structures. ...
The work is also supported by the National Natural Science Foundation of China (no. 50878170) partly. ...
doi:10.1155/2010/724962
fatcat:kcphoublefa77dqfsnmztvos2u
International master program in structural engineering at Leipzig University of Applied Sciences (HTWK Leipzig)
[chapter]
2013
Research and Applications in Structural Engineering, Mechanics and Computation
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
"Shaking table tests on a large scale moment resistant timber frame with post-tensioning and energy dissipating system". 5th International Conference on Structural Engineering, Mechanics and Computation ...
Smith, T., Pampanin, S., Carradine, D., Buchanan, A., Ponzo, F., Cesare, A.D., and Nigro, D. (2011) . "Experimental Investigations into Post-Tensioned Timber Frames with Advanced Damping Systems." ...
Doctoral thesis in Civil engineering. Department of Civil engineering and Environment. ...
doi:10.1201/b15963-464
fatcat:chhtyh4vt5fdthmbqglowbzdlq
Experimental and Numerical Study of Adhesively and Bolted Connections of Pultruded GFRP I-Shape Profiles
2022
Polymers
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
Recent developments indicate that the application of pultruded FRP profiles has been continuously growing in the construction industry. ...
The mechanical behavior of adhesively and bolted joints for pultruded Glass FRP (GFRP) profiles has been experimentally addressed and numerically modeled. ...
Further research may include defining the complex web-to-flange shear failure in the numerical model through using a more detailed material definition or including an additional material in the web-to-flange ...
doi:10.3390/polym14050894
pmid:35267723
pmcid:PMC8912490
fatcat:lj74iyjqfvf3jjvxorsjrqt7y4
State-of-the-art of prefabricated FRP composite jackets for structural repair
2020
Engineering Science and Technology, an International Journal
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
in terms of durability, self-weight and complex installation process. ...
The review also identifies the challenges and highlights the future directions of research to increase the acceptance and use of emerging composite repair systems. ...
., Australia for the financial, materials, and technical support in conducting this study. ...
doi:10.1016/j.jestch.2020.02.006
fatcat:irppc4do2vdilf47fschkvxgtm
Literature Review: Concrete Filled Steel Tubes Under Transverse Impact Loading
2021
Current Trends in Civil & Structural Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
In addition, the numerical mesh, elements, loading conditions used by previous studies were illustrated. ...
Furthermore, the results of previous researchers were examined in terms of failure modes, Impact Force versus Impact Time and Mid-span Deflection versus Impact Time and residual displacements. ...
[147] conducted a numerical modelling simulation. Moreover, the numerical analysis considered the mechanical response of CFST during its life frame. ...
doi:10.33552/ctcse.2021.07.000665
fatcat:aheb3rwz5rabrdrdoa4xe5jr7i
Critical review of strength and durability of concrete beams externally bonded with FRP
2018
Cogent Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Finally, the review also showed that the Pellegrino and Modena model provides a good prediction of the shear strength of FRP-strengthened concrete beams. ...
The aim of this paper is to provide an extensive review of a considerable number of papers in which a special emphasis is placed on the finding of the most recent papers. ...
Abid is currently a professor at the civil engineering department in the Wasit University/ Iraq. He has a Ph.D. degree in civil/structural engineering. ...
doi:10.1080/23311916.2018.1525015
fatcat:vk4dzj2skjduxhcobbhxlrl6b4
Review of Experimental Studies on Application of FRP for Strengthening of Bridge Structures
2020
Advances in Materials Science and Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
Based on existing studies in the literature, this paper reviews the development and applications of FRP materials for the strengthening and rehabilitation of bridge structures. ...
In recent years, fiber-reinforced polymer (FRP) composites have been widely used as a new type of high-performance material in concrete structures. ...
Acknowledgments e authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: this work was financially supported by the Natural Science ...
doi:10.1155/2020/8682163
fatcat:txdfhg53enbinivovyvids357i
Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet
2017
Scientia Iranica. International Journal of Science and Technology
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
In this study, Finite Element Method (F.E.M.) was used to simulate the elements of steel and ber polymers by Abaqus software under cycle loading after designing of ber layers and connection type. ...
Thus, these two parts were connected by epoxy resin and bolts. ...
The idea of strengthening steel elements using mechanically anchored FRP laminates emerged as a consequence of the successful application of this technique to FRP-BR connections. ...
doi:10.24200/sci.2017.4279
fatcat:s2ksbquojrdrhdoo3b2bna6ccu
A state of the art review on reinforced concrete beams with openings retrofitted with FRP
2016
International Journal of Advanced Structural Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The use of externally bonded fiber reinforced polymer (FRP) sheets, strips or steel plates is a modern and convenient way for strengthening of reinforced concrete (RC) beams. ...
Moreover, important practical issues, which are contributed in shear strengthening of beams with different strengthening techniques, such as steel plate and FRP laminate, and detailed with various design ...
FRP in civil engineering can be classified into: for new constructions repair and rehabilitation applications, and architectural applications (Fig. 2) . ...
doi:10.1007/s40091-016-0128-7
fatcat:h7h2tukgcnc4hk5eoyg5icrmfm
Pin-bearing strengths for bolted connections in fibre-reinforced polymer structures
2011
Proceedings of the Institution of Civil Engineers : Structures and buildings
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
ACKNOWLEDGMENTS In preparing the specimens the authors acknowledge the technical support given to this research by Mr C. Banks of the School of Engineering at the University of Warwick. ...
ACMA develops design standard for civil engineers. Reinforced ...
Mean -1.77SD
Figure Captions the American Society of Civil Engineers (ASCE) and the American Composites Manufacturers Association (ACMA) signed a three-year agreement to develop a pre-standard ...
doi:10.1680/stbu.2011.164.5.291
fatcat:7lqjhvtqsra2tf27rfxijoh3fm
State-of-the-art and annual progress of bridge engineering in 2020
2021
Advances in Bridge Engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2022; you can also visit the original URL.
The file type is application/pdf.
durability of the concrete bridges, fatigue of steel bridge, temperature field and temperature effect of bridge; The third part is about the bridge analyses, including numerical simulation of bridge structure ...
To better develop relevant bridge science, this paper introduces the main research progress in China and abroad in 2020 from 16 aspects. The content consists of four major categories in 16 aspects. ...
in many fields of civil engineering. ...
doi:10.1186/s43251-021-00050-x
fatcat:sslhssowinhs7iggy5p3zpgrpm
« Previous
Showing results 1 — 15 out of 271 results