A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Filters
ISSCC 2019 Session 10 Overview: Sensor Interfaces
2019
2019 IEEE International Solid- State Circuits Conference - (ISSCC)
Preserved Fulltext
In the first paper, a highly-integrated energy measurement system is shown that uses self-calibration to achieve high robustness. ...
The system consists of a MEMS accelerometer, an HV driver ASIC and a low-voltage signal processing ASIC. ...
8:30 AM 10.1 An Energy Measurement Front-End with Integrated In-Situ Background Full System Accuracy Monitoring Including the Current and Voltage Sensors S. ...
doi:10.1109/isscc.2019.8662487
fatcat:h5mf3xe6orcf7anhu5ycbo3zdq
Vertex-detector R&D for CLIC
2014
Journal of Instrumentation
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
Other Versions
In this paper the CLIC vertex-detector requirements are reviewed and the current status of R&D on sensors, readout and detector integration is presented. ...
It comprises fast, low-power and small-pitch readout ASICs implemented in 65 nm CMOS technology (CLICpix) coupled to ultra-thin sensors via low-mass interconnects. ...
They are integral parts of the full coverage tracking systems, designed to improve the accuracy of the track reconstruction, in particular for low transverse momenta. ...
doi:10.1088/1748-0221/9/03/c03026
fatcat:hz5pq2ef5vax5caps3257pmc2y
SoLid: A short baseline reactor neutrino experiment
[article]
2020
arXiv
pre-print
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Note that this fulltext copy is not of the "primary" version of this work. The version it corresponds to is:
2020 pre-print arXiv:2002.05914v2 fatcat:dso2n2vvvfh3ff575nu67n2fiyOther Versions
measurements at very short distances from a reactor core and with little or no overburden. ...
The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino energy spectrum and flux and to search for very short distance neutrino oscillations as a probe ...
The current simulation model includes the in-situ measured attenuation length of each bre. ...
arXiv:2002.05914v3
fatcat:kdzwsqe72rgizmb2kq2nqztety
The s-CVD Radiation Monitoring and Beam Abort System of the Belle-II Vertex Detector
[article]
2017
arXiv
pre-print
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
A radiation monitoring and beam abort system has been developed based on single-crystal s-CVD diamond sensors. ...
In this contribution we present the system design, along with the sensor characterisation procedure. ...
In order to detect beam conditions that could damage the VXD detector and its front-end electronics, a monitoring system [4] [5] [6] needs to be developed.
II. ...
arXiv:1711.06823v1
fatcat:6zkygqze3fbbxatxh2onxv4ddi
SoLid: a short baseline reactor neutrino experiment
2021
Journal of Instrumentation
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino energy spectrum and flux and to search for very short distance neutrino oscillations as a probe ...
JINST 16 P02025 reactor neutrino measurements at very short distances from a reactor core and with little or no overburden. ...
the sub-department of Particle Physics at Oxford and High Energy Physics at Imperial College London. ...
doi:10.1088/1748-0221/16/02/p02025
fatcat:3co2pmxnwfbqhkutzdehnj43qi
Smart Portable Pen for Continuous Monitoring of Anaesthetics in Human Serum with Machine Learning
2021
IEEE Transactions on Biomedical Circuits and Systems
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
The system consists of a needle-shaped sensor, a quasi digital front-end, a smart machine learning data processing, in a single wireless battery-operated embedded device featuring Bluetooth Low Energy ...
Still, the sensors proposed do not enable in-situ detection, they do not provide this information continuously, and they are based on bulky and costly lab equipment. ...
ACKNOWLEDGMENT The authors would like to thank Dr. Francesca Criscuolo for her helpful advice and Dr. Alessandro Sanginario for his help in 3D printing. ...
doi:10.1109/tbcas.2021.3067388
pmid:33739925
fatcat:vidstghfnfftdoeomeh2ny4dre
Triboelectric Effect Enabled Self-Powered, Point-of-Care Diagnostics: Opportunities for Developing ASSURED and REASSURED Devices
2021
Micromachines
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
This review provides an overview of the current state of the art of such wearable sensors and end-to-end solutions for physiological and biomarker monitoring. ...
We further discuss the current constraints and bottlenecks of these devices and systems and provide an outlook on the development of TENG-enabled PoC/monitoring devices that could eventually meet criteria ...
For example, an ASIC integrating low-power analog front end and a digital back end for PPG monitoring was shown to consume~172 µW of energy [34] . ...
doi:10.3390/mi12030337
pmid:33810006
fatcat:o6ljhjcq3zexbevcibkcfcxduq
An Integrated Energy-Efficient Wireless Sensor Node for the Microtremor Survey Method
2019
Sensors
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
According to the results of a series of in situ tests and field measurements, the noise level of the system was 0.7 μV@500 Hz with 0 dB attenuation and 220 mW power consumption of the system in the autonomous ...
In this study, we combined a 2 Hz moving coil geophone with advanced acquisition systems to develop a new integrated energy-efficient wireless sensor node for microtremor exploration. ...
Authors express their gratitude to Changchun Institute of Optics, Fine Mechanics and Physics in Chinese Academy of Sciences and State Key Laboratory of Power Transmission Equipment & System Security and ...
doi:10.3390/s19030544
fatcat:qtqp4hiiabarhjnjvgikuxt7jq
Caliste-SO: the x-ray spectrometer unit of the STIX instrument onboard the Solar Orbiter space mission
2014
High Energy, Optical, and Infrared Detectors for Astronomy VI
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Caliste-SO is a hybrid detector integrating in a volume of 12 × 14 × 18 mm 3 a 1 mm-thick CdTe pixel detector, a frontend IDeF-X HD ASIC and passive parts to perform high resolution spectroscopy in the ...
4-200 keV energy range with high count rate capability (10 4 -10 5 photons/s/cm2). ...
The similar holding system for the CdTe pixel sensor is connected to an ASIC board and a full acquisition system is installed in the clean room to record 133 Ba spectra at -20°C. ...
doi:10.1117/12.2055171
fatcat:mre4mcq6tfc4tfffnytfzbkwky
EndoTOFPET-US – A Miniaturised Calorimeter for Endoscopic Time-of-Flight Positron Emission Tomography
2015
Journal of Physics, Conference Series
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The design of the system, the status of the the single detector components and the integration plans are discussed. ...
For the endoscopic detector, digital SiPMs are utilised for the first time in an instrument planned for clinical applications. ...
Acknowledgments The author thanks the EndoTOFPET-US collaboration for the privilege of representing it at this conference. This research project has received funding from the European Union 7th ...
doi:10.1088/1742-6596/587/1/012068
fatcat:npehkwhwarhndhw6y5fl5t7m5y
SewerSnort: A Drifting Sensor for In-situ Sewer Gas Monitoring
2009
2009 6th Annual IEEE Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The key innovations of SewerSnort are the fully automated, end-to-end monitoring solution and the low energy self localizing strategy. ...
A sensor float is introduced at the upstream station and drifts to the end pumping station, collecting location tagged gas measurements. ...
ACKNOWLEDGEMENT We thank RAE Systems for providing a QRAE gas detector and H 2 S electrochemical sensors (RAE 032-0102-000). We thank Woonghee Lee for providing 3D SewerSnort schematic. ...
doi:10.1109/sahcn.2009.5168971
dblp:conf/secon/KimLFLVRGS09
fatcat:idtwkd2ngfh5haty6egkz4bk6a
The CMS experiment at the CERN LHC
[chapter]
2013
The Search for the Higgs Boson at CMS
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
At the core of the CMS detector sits a high-magneticfield and large-bore superconducting solenoid surrounding an all-silicon pixel and strip tracker, a lead-tungstate scintillating-crystals electromagnetic ...
The iron yoke of the flux-return is instrumented with four stations of muon detectors covering most of the 4π solid angle. ...
The cost of the detectors, computing infrastructure, data acquisition and all other systems without which CMS would not be able to operate, was generously supported by the financing agencies involved in ...
doi:10.1007/978-88-7642-482-3_2
fatcat:vmhptjphmfddddm2gtb35s3ifm
The Jovian Auroral Distributions Experiment (JADE) on the Juno Mission to Jupiter
2013
Space Science Reviews
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The Jovian Auroral Distributions Experiment (JADE) on Juno provides the critical in situ measurements of electrons and ions needed to understand the plasma energy particles and processes that fill the ...
JADE is an instrument suite that includes three essentially identical electron sensors (JADE-Es), a single ion sensor (JADE-I), and a highly capable Electronics Box (EBox) that resides in the Juno Radiation ...
Acknowledgements We are deeply indebted to all of the outstanding members of the JADE team who ...
doi:10.1007/s11214-013-9990-9
fatcat:cp4otrbdlbhqdfczed7iqjzy7i
The Jovian Auroral Distributions Experiment (JADE) on the Juno Mission to Jupiter
[chapter]
2013
The Juno Mission
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The Jovian Auroral Distributions Experiment (JADE) on Juno provides the critical in situ measurements of electrons and ions needed to understand the plasma energy particles and processes that fill the ...
JADE is an instrument suite that includes three essentially identical electron sensors (JADE-Es), a single ion sensor (JADE-I), and a highly capable Electronics Box (EBox) that resides in the Juno Radiation ...
Acknowledgements We are deeply indebted to all of the outstanding members of the JADE team who ...
doi:10.1007/978-94-024-1560-5_13
fatcat:xixhhsfutjbjdhd5x6oliwy7my
ANTARES: The first undersea neutrino telescope
2011
Nuclear Instruments and Methods in Physics Research Section A : Accelerators, Spectrometers, Detectors and Associated Equipment
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Other Versions
This paper describes the design, the construction and the installation of the telescope in the deep sea, offshore from Toulon in France. An illustration of the detector performance is given. ...
The ANTARES Neutrino Telescope was completed in May 2008 and is the first operational Neutrino Telescope in the Mediterranean Sea. ...
Acknowledgements The authors acknowledge the financial support of the funding agencies: ...
doi:10.1016/j.nima.2011.06.103
fatcat:shrmshrg6fdgbcofu4d3vn57c4
« Previous
Showing results 1 — 15 out of 3,702 results