73,244 Hits in 9.6 sec

A model for strengthening the software engineering research capacity

Roumen Nikolov, Sylvia Ilieva
2008 Proceedings of the 2008 international workshop on Software Engineering in east and south europe - SEESE '08  
This paper describes a model for strengthening the research capacity of FMI, especially the one in the area of Software Engineering.  ...  Keywords Software engineering research, models for strengthening university research capacity, industry university cooperation hal-  ...  This paper describes a model for strengthening the research capacity of FMI, especially the one in the area of Software Engineering.  ... 
doi:10.1145/1370868.1370887 fatcat:eg4qgddsnrg3zpkgdhpvflwzlq

Evaluation of Performance of Shear Deficient Curved Beams Strengthened by Different Methods

Priyanka Prakash
2020 International Journal for Research in Applied Science and Engineering Technology  
The validated numerical models are then used for studying the efficacy and effectiveness of various strengthening schemes using epoxy impregnated GFRP fabric where the number of layers, orientation and  ...  Modelling and analysis of curved beams is done in ANSYS 16.1 software.  ...  Modelling is done using ANSYS. ANSYS is an American Computer-aided engineering software which stands for Analysis of Systems.  ... 
doi:10.22214/ijraset.2020.1094 fatcat:i5p5jfjkqnhebo3d262tv4e2le

Nonlinear FEM Numeral Simulation of RC Shear Walls with Staggered Holes

Xingyan Liu, Yang Zhang
2017 DEStech Transactions on Engineering and Technology Research  
Thus it is necessary for engineers to use finite elements software to design and analyze structures.  ...  Scholars had taken a great deal of research on shear walls.  ... 
doi:10.12783/dtetr/iceta2016/7105 fatcat:bwgzmwz5wraxdasg6sdaw22mj4

Retrofitting Reinforced Concrete Columns using Fibre Reinforce Polymer (FRP)

Yash M. Parikh
2019 International Journal for Research in Applied Science and Engineering Technology  
Experimental results indicate a significant increase of ductility and increase in energy absorption capacity of RC beam-column when strengthened by both GFRP and CFRP Jacket. Z.  ...  LITERATURE REVIEW Patil presented paper which deals with the verification of experimental results in terms of load-carrying capacity and strains, by using software.  ...  SCOPE OF THE PAPER Rehabilitation and strengthening of old structures using advanced materials is a Contemporary research in the field of Structural Engineering.  ... 
doi:10.22214/ijraset.2019.6452 fatcat:ozc4w53gt5adnkbsqdrr7qto7q

Nonlinear analysis of RC deep beams strengthened with NSM CFRP anchor bars

Hassen et al., Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia, Faculty of Civil Engineering, University of Kufa, Kufa, Iraq
2018 International Journal of Advanced and Applied Sciences  
The study comprises of developing four analytical models using finite element method software ANSYS Version 14. Results of the analytical model and experimental findings were compared for validation.  ...  Shear capacity shows proximity between the analytical model and experimental results observed at 15 % for beams R1 and R2, and 7 % for beams R3 and R4.  ...  Material modelling and meshing Many element types that available in ANSYS software can be used for the composite member for finite element method.  ... 
doi:10.21833/ijaas.2018.11.008 fatcat:valoirxkefhzlj5a5xq3bskms4

Analysis of Bearing Capacity and Seismic Performance of Circular RC Columns Strengthened with Externally Wrapped Steel Plates

Chunli Zhou, Xiaowei Li, Dongbo Wang, Shunxiang Xia
2019 Advances in Civil Engineering  
In order to study the bearing capacity and seismic performance of circular RC columns after strengthening, a formula for calculating the bearing capacity of circular RC columns strengthened with externally  ...  The results showed that the bearing capacity of the normal section of the RC column after strengthening was about 80% higher than that before strengthening, and the results of FEM software were in accord  ...  Figure 6 : 6 FEM models: (a) FEM model of steel bar skeleton; (b) FEM model of concrete; (c) FEM model of steel plates for strengthening; (d) FEM model of frame columns after reinforcement.  ... 
doi:10.1155/2019/2515091 fatcat:3szzbdtqljgdpohoi6akeld4lu

Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns

Nahushananda Chakravarthy H G, Siddaganga institute of technology, B.H Road, Tumakuru, 572102, INDIA, Jahnavi S J, Sivakumar Naganathan, Siddaganga institute of technology, B.H Road, Tumakuru, 572102, INDIA, ri Sivasubramaniya Nadar College of Engineering, Kanchipuram, Tamil Nadu 603110, INDIA
2022 International Journal of Sustainable Construction Engineering Technology  
All the built-up columns were modeled and analysed using ABAQUS software.  ...  This paper reports the numerical investigation carried out on the Cold-formed steel (CFS) built up columns strengthened with a Carbon fiber-reinforced polymer (CFRP) by using Finite element software ABAQUS  ...  Acknowledgment The authors would like to thank the management of 1Siddaganga institute of technology for enabling the platform, which made for this research work possible.  ... 
doi:10.30880/ijscet.2022.13.01.023 fatcat:ujismtj4qncyrexqba3yyky2yi

Investigation on Behaviour of Near Surface Mounted Beams Strengthened by Fibre Reinforced Polymers using ANSYS Software

Krishnapriya S, Linda Ann Mathew
2016 International Journal of Engineering Research and  
A two point loading system is adopted for the analysis. Beams were analyzed using ANSYS workbench software and the results are plotted graphically.  ...  Strengthening has become an acceptable way of improving the load carrying capacity.  ...  III.METHODOLOGY The strategy followed in this research was first started with geometry selection. Modeling was then done using ANSYS workbench software.  ... 
doi:10.17577/ijertv5is070268 fatcat:xmfl4iv5pndzrjr7uaz5jz2ie4

A Numerical Investigation on the Structural Behavior of Deficient Steel Frames Strengthened using CFRP Composite

Amir Hamzah Keykha
2018 Civil Engineering Dimension  
The results showed that the coverage length, the width, and the number of CFRP layers have a significant effect on increasing and recovering the ultimate load capacity of the SHS steel frames having initial  ...  Seven specimens, five of which were strengthened using CFRP sheets, were analyzed. ANSYS software was used to analyze the SHS steel frames.  ...  For example, Figure 8 shows the 3D finite element model of the specimen prepared using ANSYS software (specimen DFC0).  ... 
doi:10.9744/ced.20.1.1-7 fatcat:heob3ghq2ndafe3klvdk7bwn2a

Analysis Of Reinforcement Testing Of Bamboo Cuts For Road Board Employment On Soil Soil

Tri Sutrisno Bahri, Sapto Budy Wasono, Ario Muhammad
2021 ADRI international journal of sciences, engineering and technology  
Soil is a support for a building that functions as a support for the construction load on it.  ...  So the strengthening of the bearing capacity of the soil using a bamboo cone mat is very influential on the strengthening of the carrying capacity of the soil.  ...  From the results of the SF (safety factor) which shows that the method of strengthening the bearing capacity of soft soil with bamboo cone mats for the Juanda Sidoarjo frontage road embankment has exceeded  ... 
doi:10.29138/ijset.v6i01.65 fatcat:36fhfgijardudfvtselmg3ja74

Analytical Performance of Hybrid GFRP Deck Panel Strengthen with Corrugated Ribs

Nisni M Hassain, Renny Varghese
2019 Zenodo  
This paper deals with the analytical performance of hybrid GFRP deck panel strengthen with corrugated ribs.  ...  The load deflection behavior of GFRP deck panels were compared with the conventional system on the basis of finite element analysis done using ANSYS software.  ...  Conventional deck is modelled and their strengthening is also studied for comparison. A.  ... 
doi:10.5281/zenodo.3237104 fatcat:u6p5x3thyvbmhoy52x6wcpxov4

A Comparison between Strengthened CFRP and GFRP laminated RC Beam: Finite Element Approach

Md.Fazla Rabbi Anik, Md. Mehedi Hassan Asif, Saima Hannan Raha, Dr.Sharmin Reza Chowdhury
2020 Zenodo  
Nowadays, the demand of strengthening or retrofitting of existing structures is increasing because of its sustainability but more challenging for engineers to apply it.  ...  The results indicate that CFRP laminated beam has a higher load carrying capacity than that of Control and GFRP laminated beams.  ...  Engineers can use FEM software on a vast variety of tasks practically.  ... 
doi:10.5281/zenodo.4289927 fatcat:zlzdex6aofdfxcfoyaqbanllna

Analysis of Rehabilitation Effect on the Improvement Capacity of Reinforced Concrete Beams with FEM

M. Ahmadi
2013 Procedia Engineering  
One of the common ways for strengthening the reinforced concrete sections is using the FRP sheets.  ...  ANSYS software is used to modelling and analysis of beams. All of the models are compared with experimental results.  ...  For this purpose, in this research a numerical model is presented. The influence of various effective parameters on flexural behavior has been checked.  ... 
doi:10.1016/j.proeng.2013.03.030 fatcat:zm3d5wwk7rfozo3pn2zpody5wu

Finite Element Analysis of Reinforced Concrete Beam for Carbon Fiber-Reinforced Plastic

Nan Huang, Hui Li, Ping Fei Xu
2015 Applied Mechanics and Materials  
one unstrengthened and one strengthened reinforced concrete beam.Then,the finite element model is carried out based on Ansys finite element analysis software.The reinforced beam carrying capacity is improved  ...  The flexural behavior of reinforced concrete beams strengthened by CFRP is analyzed by using the way which connected tests with finite element simulation.First,through the test to get the load data of  ...  Numerical modeling of elements for concrete, the steel bar was modeled using this is still an active area of research.  ... 
doi:10.4028/ fatcat:xo4oo3dk3jgrxhk3mx7qyty4jm

FEM Study of Different Methods of Fiber Reinforcement Polymer Strengthening of a High Strength Concrete Beam-Column Connection

Talebi Aliasghar, Ebrahimpour Komeleh Hooman, Maghsoudi Ali Akbar
2018 Zenodo  
The concrete damage plasticity (CDP) model has been used to analyze the RC. The results illustrated a considerable development in load-bearing capacity but also a noticeable reduction in ductility.  ...  The study also assesses these qualities for several modes of strengthening and suggests the most effective mode of strengthening.  ...  MODELING METHOD For FE modeling of RC, there are three main methods in a finite element software such as ABAQUS which are: concrete smeared cracking, concrete brittle cracking and CDP.  ... 
doi:10.5281/zenodo.2363229 fatcat:v62sdclt2fdorh7hv4ivw7jx5q
« Previous Showing results 1 — 15 out of 73,244 results