Filters








1,153 Hits in 4.2 sec

Operation management in reconfigurable manufacturing systems: Reconfiguration for error handling

Manfredi Bruccoleri, Zbigniew J. Pasek, Yoram Koren
2006 International Journal of Production Economics  
This paper, starting from a simulation case study, highlights advantage of using reconfiguration for error handling.  ...  Reconfigurable manufacturing systems offer quick adjustment of production capacity and functionality in response to unpredictable market changes as being systems designed at the outset for rapid change  ...  Bruccoleri to be a visiting scholar at the NSF ERC for Reconfigurable Machining System at the University of Michigan throughout the presented research.  ... 
doi:10.1016/j.ijpe.2004.10.009 fatcat:2xfescjekfgrxczmyqlelfdnxy

SysML-based design chain information modeling for variety management in production reconfiguration

Dazhong Wu, Linda L. Zhang, Roger J. Jiao, Roberto F. Lu
2011 Journal of Intelligent Manufacturing  
Based on a model-based systems engineering approach, this paper applies the Systems Modeling Language (SysML) to model design chain information.  ...  Satisfying diverse customer needs leads to proliferation of product variants. It is imperative to model the coherence of functional, product and process varieties throughout the design chain.  ...  Acknowledgments The authors would like to thank Chris Paredis and Leon McGinnis for providing access and support for MagicDraw.  ... 
doi:10.1007/s10845-011-0585-6 fatcat:qnndohql5ncbvkigkf73qz6gci

Object-Oriented Modeling, Simulation and Automatic Generation of PLC Ladder Logic [chapter]

Kwan Hee
2010 Programmable Logic Controller  
After validating control logic through simulation, FA engineers modify UML design model for reflecting the simulation result.  ...  During the design phase, FA engineers develop three models for describing the various perspectives of manufacturing systems: 1) a functional model for representing functional system requirements of AMS  ...  /books/programmable-logic-controller/object-oriented-modeling-simulation-andautomatic-generation-of-plc-ladder-logic © 2010 The Author(s).  ... 
doi:10.5772/7190 fatcat:el6ylcbd7nclpb33w6hfs7ur7y

Model-based Development of Modular Complex Systems for Accomplishing System Integration for Industry 4.0

Kunal Suri, Arnaud Cuccuru, Juan Cadavid, Sebastien Gerard, Walid Gaaloul, Samir Tata
2017 Proceedings of the 5th International Conference on Model-Driven Engineering and Software Development  
We propose a model-based approach for modular complex systems development by separating (1) the behavior model and (2) the implementation logic (execution) of the system.  ...  Using our approach, multiple heterogeneous systems can be modeled and integrated together to create a "plug and play" ecosystem needed for achieving the vision of Industry 4.0.  ...  ., 2014) discussed the use of UML profile mechanism for designing a DSL in their work.  ... 
doi:10.5220/0006210504870495 dblp:conf/modelsward/SuriCCGGT17 fatcat:f7r37p3kqzevtps5s35dlhpwdm

UML-PA AS AN ENGINEERING MODEL FOR DISTRIBUTED PROCESS AUTOMATION

Uwe Katzke, Birgit Vogel-Heuser
2005 IFAC Proceedings Volumes  
The adoption of UML regarding applied diagrams and stereotypes for process automation will be introduced and evaluated.  ...  For the domain of process automation an implementation oriented approach for an object oriented software development for heterogeneous distributed systems is introduced.  ...  The closed loop controls, implemented from the UML-PA model for press control are performed on a simulated model (Matlab Simulink) of the press and there they are confronted with a reactive behavior.  ... 
doi:10.3182/20050703-6-cz-1902.01063 fatcat:xccoyqntobafpnai3ldbpyyyn4

Integration approach to virtual-driven discrete event simulation for manufacturing systems

Usman Ghani, Radmehr Monfared, Robert Harrison
2014 International journal of computer integrated manufacturing (Print)  
Therefore to integrate the virtual engineering tools data with the discrete event simulation this paper proposes an approach of virtual driven generic discrete event simulation modelling (named as VDsim  ...  Manufacturing systems designers and planners ever tries to adopt the modern technologies and techniques to design and validate different production processes.  ...  The National Institute of Standards and Technology worked in the Core Manufacturing Simulation Modelling Information collection for shop floor using the UML model mapping.  ... 
doi:10.1080/0951192x.2014.924159 fatcat:sdu6htbof5dnlefhjzq3snw2s4

A Model Driven Approach for Automated Generation of Service-Oriented Holonic Manufacturing Systems [chapter]

Mohammed El Amin Tebib, Pascal André, Olivier Cardin
2018 Studies in Computational Intelligence  
In this paper, we investigate a Model Driven Engineering approach to represent these systems in order to automate the generation of the services logic code from an abstract models and construct a new software  ...  Several approaches succeeded in creating a Service-oriented Holonic Manufacturing System that combines the advantages of Service-oriented Architectures and Holonic Manufacturing Systems.  ...  Model Engineering (UML models) For the modeling layer, the workshop and manufacturing models will be described using standard or domain specific languages (DSL) like UML, OCL, SysML, AADL, Kmelia as mentioned  ... 
doi:10.1007/978-3-030-03003-2_14 fatcat:zllkjpdnqbdqnh2w3ozikgalbe

Verifying Service Continuity in a Dynamic Reconfiguration Procedure: Application to a Satellite System

L. Apvrille, P. de Saqui-Sannes, P. Sénac, C. Lohr
2004 Automated Software Engineering : An International Journal  
The paper discusses the use of the TURTLE UML profile to model and verify service continuity during dynamic reconfiguration of embedded software, and space-based telecommunication software in particular  ...  The paper demonstrates the benefits of using TURTLE to prove service continuity for dynamic reconfiguration of embedded software.  ...  The masterpiece of a UML design is definitely the class diagram which describes a structured view of the system's architecture.  ... 
doi:10.1023/b:ause.0000017742.47984.6c fatcat:csks3tv6ufbwflfgwfny3ixp7y

Formal approach based on petri nets using agent paradigm for m-maintenance

Khadija Abid, Leila Hayet Mouss, Okba Kazar, Laid Kahloul
2017 International Journal of Critical Computer-Based Systems  
The objective of this work is both: 1) the proposition of a based mobile multi-agent architecture dedicated for m-maintenance in manufacturing systems; 2) the exploitation of high level petri nets in the  ...  The long use of a system in a manufacturing environment causes its degradation, thus the maintenance activity is required in this environment to keep and to improve the efficiency of the system.  ...  They propose a hybrid approach based on UML.2 and INRS, to design reconfigurable manufacturing systems.  ... 
doi:10.1504/ijccbs.2017.084066 fatcat:byi5oqoomvc6rirzo27pmkujqq

Software Engineering in Industrial Automation: State-of-the-Art Review

Valeriy Vyatkin
2013 IEEE Transactions on Industrial Informatics  
The survey's methodology is based on the classic SWEBOK reference document that comprehensively defines the taxonomy of software engineering domain.  ...  This paper presents one perspective on recent developments related to software engineering in the industrial automation sector that spans from manufacturing factory automation to process control systems  ...  Moreover, the simulation model is obtained with a high degree of components' re-use.  ... 
doi:10.1109/tii.2013.2258165 fatcat:sx4qitarozdehokrdm2cwrp5oe

Towards a Formal Specification of Production Processes Suitable for Automatic Execution

Marko Vještica, Vladimir Dimitrieski, Milan Pisarić, Slavica Kordić, Sonja Ristić, Ivan Luković
2021 Open Computer Science  
In this paper we propose a research on Industry 4.0 manufacturing using a Domain-Specific Modeling Language (DSML) within a Model-Driven Software Development (MDSD) approach to model production processes  ...  A pilot comparative analysis of three modeling languages that are commonly used for process modeling is given with the goal of identifying supported modeling concepts, good practices and usage patterns  ...  Acknowledgement: The research in this paper is supported by KEBA AG Linz.  ... 
doi:10.1515/comp-2020-0200 fatcat:kedh2qlxlffhfc2c6v6na5pur4

Design, Development & Implementation Of Ontological Knowledge Based System For Automotive Assembly Lines

Muhammad Baqar Raza, Robert Harrison
2011 International Journal of Data Mining & Knowledge Management Process  
It follows that reconfigurable techniques can be further complemented with the help of knowledge based systems to design, engineer, manufacture, commission and change existing processes and resources against  ...  Product, Process and Resource (PPR) are the core areas in an engineering domain of a manufacturing enterprise which are tightly coupled with each other.  ...  ACKNOWLEDGEMENTS The authors gratefully acknowledge the support of the UK EPSRC and Loughborough University's IMCRC through 'BDA' and 'AESOP' projects.  ... 
doi:10.5121/ijdkp.2011.1503 fatcat:inllfk5wyvbmjgnjnswx7zrfne

An ESL Approach for Energy Consumption Analysis of Cache Memories in SoC Platforms

Abel G. Silva-Filho, Filipe R. Cordeiro, Cristiano C. Araújo, Adriano Sarmento, Millena Gomes, Edna Barros, Manoel E. Lima
2011 International Journal of Reconfigurable Computing  
It uses as entry a high-level UML-2.0 profile model of the system and it generates a simulation model of a multicore platform that can be analyzed for cache tuning.  ...  Thus, developing new high-level specification mechanisms for the reduction of the design effort with automatic architecture exploration is a necessity.  ...  However, in both approaches, UML designs are merely representations of SystemC models.  ... 
doi:10.1155/2011/219497 fatcat:vsdfqvs27ncxtj6v7awxujxsny

Product, process and resource model coupling for knowledge-driven assembly automation

Borja Ramis Ferrer, Bilal Ahmad, Daniel Vera, Andrei Lobov, Robert Harrison, José Luis Martínez Lastra
2016 at - Automatisierungstechnik  
For proof of concept, an example implementation of the approach for modelling and integration of PPR for a Festo test rig is presented as a case study.  ...  design and reconfiguration of manufacturing resources.  ...  Acknowledgement: The authors gratefully acknowledge the support of the UK EPSRC through the Knowledge-Driven Configurable Manufacturing (KDCM) research  ... 
doi:10.1515/auto-2015-0073 fatcat:oz7nls6rzjd45nu5rjgz5e7p5i

Partial Reconfiguration in the Field of Logic Controllers Design

Michał Doligalski, Arkadiusz Bukowiec
2013 International Journal of Electronics and Telecommunications  
The paper presents method for logic controllers multi context implementation by means of partial reconfiguration. The UML state machine diagram specifies the behaviour of the logic controller.  ...  HCfgPN are a Petri nets variant with the direct support of the exceptions handling mechanism. The paper presents placesoriented method for HCfgPN description in Verilog language.  ...  This approach is natural in the field of control algorithms specified by means of UML state machine diagrams, however there is no direct support for exception handling in Petri net model.  ... 
doi:10.2478/eletel-2013-0042 fatcat:jkpml6ncujcebhmccfqjzt3rse
« Previous Showing results 1 — 15 out of 1,153 results