14,311 Hits in 6.6 sec

An up-conversion TV receiver front-end with noise canceling body-driven pMOS common gate LNA and LC-loaded passive mixer

Donggu Im, Ilku Nam
2017 IEICE Electronics Express  
A low noise and highly linear up-conversion digital TV (DTV) receiver front-end, which consists of a noise canceling body-driven pMOS common gate (CG) LNA, a LC-loaded passive mixer, and a surface acoustic  ...  The designed RF front-end shows a measured conversion gain of greater than 17 dB, a NF of less than 2.7 dB, and a third-order input-referred intercept point (IIP3) of greater than −2.7 dBm over DTV frequency  ...  Nam: "A wideband digital TV receiver front-end with noise and distortion cancellation," IEEE Trans. Circuits Syst. I, Reg. Papers 61 (2014) 562 (DOI: 10.1109/TCSI.2013.2278386). [10] D.  ... 
doi:10.1587/elex.14.20170175 fatcat:gxhoydktcfc2fhiq5o5sht3h4q

0.6–3-GHz Wideband Receiver RF Front-End With a Feedforward Noise and Distortion Cancellation Resistive-Feedback LNA

Xiao Wang, Johannes Sturm, Na Yan, Xi Tan, Hao Min
2012 IEEE transactions on microwave theory and techniques  
A novel wideband receiver RF front-end, including a resistive negative feedback wideband low-noise amplifier (LNA) with feedforward noise and distortion cancellation and a current commutating down conversion  ...  A wideband receiver RF front-end fabricated in 0.13-m CMOS, based on the proposed feedforward noise and distortion-cancellation resistive-feedback LNA, has 42-48-dB conversion gain with 0.8-12-MHz tunable  ...  CONCLUSION A wideband receiver RF front-end with feedforward noise and a distortion-cancellation resistive-feedback LNA has been presented in this paper.  ... 
doi:10.1109/tmtt.2011.2176138 fatcat:qswby7uxpjagdioxfbrkwzwgwq

A 9-10.6 GHz Microstrip Antenna - UWB Low Noise Amplifier with differential Noise Canceling technique for IoT applications

Dalia Elsheakh, Heba Shawkey, Sherif Saleh
2019 Journal of Radio Electronics  
An ultra wide band (UWB) receiver front-end operates at the UWB frequency range, starting from 9 GHz-10.6 GHz is proposed in this paper.  ...  The proposed system consists of an off-chip microstrip antenna and CMOS differential low noise amplifier with a differential noise canceling (DNC) technique.  ...  receiver front-end simulation Performance (a) gain (b) Noise Figure, (c) linearity and (d) input matching.  ... 
doi:10.30898/1684-1719.2019.5.13 fatcat:cijncpyt6rhrpbh3iryhqspduy

High Dynamic Range RF Front End with Noise Cancellation and Linearization for WiMAX Receivers

J.-M. Wu, C.-H. Yeh, C.-J. Chuang
2012 Radioengineering  
The heterodyne RF front end consists of a low-noise amplifier (LNA) with noise cancellation, an RF bandpass filter (BPF), a downconverter with linearization, and an intermediate frequency (IF) BPF.  ...  This research deals with verification of the high dynamic range for a heterodyne radio frequency (RF) front end.  ...  A downconverter takes charge of the frequency conversion process in a WiMAX RF receiver front end.  ... 
doaj:7366b204b7d042929b4e3d9f9e1cdb4b fatcat:bp33owerjbfrbewe2leeip645u

An RF-to-BB-Current-Reuse Wideband Receiver With Parallel N-Path Active/Passive Mixers and a Single-MOS Pole-Zero LPF

Fujian Lin, Pui-In Mak, Rui P. Martins
2014 IEEE Journal of Solid-State Circuits  
linearity and power efficiency; 2) a feedforward 8-path passive mixer enabling LO-defined input impedance matching without external components, while offering frequency-translated bandpass filtering and  ...  The key features are: 1) a stacked RF-to-BB front-end with an 8-path active mixer realizing RF amplification, harmonic-recombination (HR) downconversion and BB filtering in the current domain for better  ...  Input Matching, NF, Gain and Power Consumption The receiver covers 0.15 to 0.85 GHz (VHF-H and UHF bands) with a LO-defined narrowband input matching dB [ Fig. 14(a) ].  ... 
doi:10.1109/jssc.2014.2354647 fatcat:rnifpfhqbza2zamaj2vysfplgq

A 9 - 10.6 GHz Microstrip Antenna—UWB Low Noise Amplifier with Differential Noise Canceling Technique for IoT Applications

Dalia Elsheakh, Heba Shawkey, Sherif Saleh
2019 International Journal of Communications, Network and System Sciences  
An ultra-wide band (UWB) receiver front-end that operates at the UWB frequency range, starting from 9 GHz -10.6 GHz is proposed in this paper.  ...  The proposed system consists of an off-chip microstrip antenna and CMOS differential low noise amplifier with a differential noise canceling (DNC) technique.  ...  Introduction Recently, rapid progress is made in ultra-wideband (UWB) applications with high data rate communications in short distances with low fabrication cost as Iinternet of things (IoT) [1] .  ... 
doi:10.4236/ijcns.2019.1211013 fatcat:bunix2dhuzd4fet5sknjp5kdxi

A Blocker-Tolerant, Noise-Cancelling Receiver Suitable for Wideband Wireless Applications

David Murphy, Hooman Darabi, Asad Abidi, Amr A. Hafez, Ahmad Mirzaei, Mohyee Mikhemar, Mau-Chung Frank Chang
2012 IEEE Journal of Solid-State Circuits  
A new wideband receiver architecture is proposed that employs two separate passive-mixer-based downconversion paths, which enables noise cancelling, but avoids voltage gain at blocker frequencies.  ...  The resulting prototype in 40 nm is functional from 80 MHz to 2.7 GHz and achieves a 2 dB noise figure, which only degrades to 4.1 dB in the presence of a 0 dBm blocker.  ...  Fig. 4 . 4 Wideband receiver employing a voltage-sampling mixer. The input impedance of the mixer acts as a high-filter. (a) Receiver topology, (b) Equivalent front-end.  ... 
doi:10.1109/jssc.2012.2217832 fatcat:qrxv2chxhvacjez6pbmixt6g6m

A Low Power Impedance Transparent Receiver with Linearity Enhancement Technique for IoT Applications

Sizheng Chen, Tingting Shi, Lei Ma, Cheng Kang, Na Yan, Hao Min
2018 Wireless Communications and Mobile Computing  
While a LO-defined input matching is formed by RF front end, the linearity of entire receiver chain is improved.  ...  A low power receiver with impedance transparent RF front end is presented.  ...  Noise Analysis of Receiver RF Front End.  ... 
doi:10.1155/2018/9130910 fatcat:i25vg4ebljc4zn4rj2f4xe3txm

A Wideband Noise and Harmonic Distortion Canceling Low-Noise Amplifier for High-Frequency Ultrasound Transducers

Yuxuan Tang, Yulang Feng, He Hu, Cheng Fang, Hao Deng, Runxi Zhang, Jun Zou, Jinghong Chen
2021 Sensors  
This paper presents a wideband low-noise amplifier (LNA) front-end with noise and distortion cancellation for high-frequency ultrasound transducers.  ...  The LNA employs a resistive shunt-feedback structure with a feedforward noise-canceling technique to accomplish both wideband impedance matching and low noise performance.  ...  Funding: This research received no external funding. Institutional Review Board Statement: Not applicable. Informed Consent Statement: Not applicable.  ... 
doi:10.3390/s21248476 pmid:34960568 pmcid:PMC8703952 fatcat:rkdqgscpvzfapd63kgoompbkze

A Low-Power 2.4-GHz Current-Reused Receiver Front-End and Frequency Source for Wireless Sensor Network

Taeksang Song, Hyoung-Seok Oh, Euisik Yoon, Songcheol Hong
2007 IEEE Journal of Solid-State Circuits  
Index Terms-Current-reused technique, flicker noise, frequency multiplier, impedance matching, input matching network, mixer noise, phase noise, pinch-off clipper, receiver front-end, UHF receivers, voltage-controlled  ...  The front-end performance is compared with the previously reported low-power front-ends operating in similar frequency ranges.  ...  And the fabricated receiver front-end achieves a voltage gain of 30.5 dB with a noise figure of 10.1 dB, achieved with only 500 W power consumption.  ... 
doi:10.1109/jssc.2007.894338 fatcat:ts7lkqbtobhx7dfp5knylh3gfa

A Wideband CMOS Low Noise Amplifier Employing Noise and IM2 Distortion Cancellation for a Digital TV Tuner

Donggu Im, Ilku Nam, Hong-Teuk Kim, Kwyro Lee
2009 IEEE Journal of Solid-State Circuits  
A wideband CMOS low noise amplifier (LNA) with single-ended input and output employing noise and IM2 distortion cancellation for a digital terrestrial and cable TV tuner is presented.  ...  Accordingly, in order to overcome the poor IIP2 performance of conventional LNAs with single-ended input and output and avoid the use of external and bulky passive transformers along with high sensitivity  ...  Abstract-A wideband CMOS low noise amplifier (LNA) with single-ended input and output employing noise and IM2 distortion cancellation for a digital terrestrial and cable TV tuner is presented.  ... 
doi:10.1109/jssc.2008.2010804 fatcat:57pne4dxszgftlkfz76ibfwfim

An integrated CMOS passive transmitter leakage suppression technique for FDD Radios

Tong Zhang, Apsara Ravish Suvarna, Venumadhav Bhagavatula, Jacques C. Rudell
2014 2014 IEEE Radio Frequency Integrated Circuits Symposium  
A new structure, Four Port Canceller (FPC) serves a dual function as a receiver (RX) input matching network, and provides an auxiliary path from transmitter (TX) to RX, used for leakage cancellation, with  ...  An example of this technique is applied to the design of WCDMA front-end including the FPC, a low noise amplifier (LNA) and an emulated power amplifier (PA) in a 40nm, 6-metallayer TSMC CMOS process.  ...  In the two-port technique, a current-mode noise cancelling receiver architecture with single-ended common source (CS), common gate (CG) LNA is applied to achieve wideband input matching and low noise.  ... 
doi:10.1109/rfic.2014.6851653 fatcat:5ftporbqlnan7e5iybaezyemre

Switchable Direct-Conversion Receiver for 2GHz and 5GHzwith Sub-harmonic Mixer

Mi-young Lee
2016 International Journal of Future Generation Communication and Networking  
Implemented in a 0.18m CMOS technology, the receiver dissipates 97mA from a 1.8V supply voltage and has 6.5dB noise figure (NF) and -4dBm input thirdorder intercept point (iIP3).  ...  For quadrature down-conversion with sub-harmonic mixing, octa-phase LO signals are generated by an integer-N type frequency synthesizer.  ...  Figure 1 . 1 Direct-conversion RF front-end architecture of 2GHz, 5GHz WLAN Figure 2 . 2 (a) Common Source Degenerated LNA with Tunable Matching Network.  ... 
doi:10.14257/ijfgcn.2016.9.8.10 fatcat:o4wf65ncujf3xbl7aksn36mml4

Analysis and design of low noise transconductance amplifier for selective receiver front-end

Quoc-Tai Duong, Fahad Qazi, Jerzy J. Dąbrowski
2015 Analog Integrated Circuits and Signal Processing  
Analysis and design of a low-noise transconductance amplifier (LNTA) aimed at selective current-mode (SAW-less) wideband receiver front-end is presented.  ...  The amplifier performance is demonstrated in a two-stage highly selective receiver front-end implemented in 65 nm CMOS technology.  ...  IMPLEMENTATION OF A SELECTIVE RECEIVER FRONT-END The proposed LNTA is used in a selective two-stage RF front-end [7] shown in Fig. 13 .  ... 
doi:10.1007/s10470-015-0629-5 fatcat:al7oxi5ksvalvgw4b53ssinnse

Low Noise Amplifier Design of CMOS Inductorless with Noise Cancellation Technique

2019 International Journal of Engineering and Advanced Technology  
This article presents the Low Noise Amplifier (LNA) design of CMOS Inductorless with noise cancellation (NC) technique for portable wireless receivers.  ...  This NC technique is used to cancel out the noise involvement in LNAs at the output of matching device. The proposed Inductorless CMOS LNA designed in a CMOS 45nm GPDK technology process.  ...  The work in this proposed article is focused on design and analysis of CMOS RF receiver front-ends composed of LNAs for wireless applications operating at microwave frequencies [2] .  ... 
doi:10.35940/ijeat.a1305.109119 fatcat:r4gltxpambdg3i6wqj7pgr5rxi
« Previous Showing results 1 — 15 out of 14,311 results