839,019 Hits in 5.0 sec

Simulation modeling of a manufacturing process using Tecnomatix plant simulation software

Mebrahitom Asmelash, Nurul Najihaha, Azmir Azharic, Freselam Mulubrhan
2021 Journal of Modern Manufacturing Systems and Technology  
Process simulation can be suitably applied for studying and analyzing the system which can provide a framework for predicting and optimizing the process based on mathematical models.  ...  The procedure starts with input data collection, data fitting, simulation model building, model validation, identification of the number throughput, and developed improvement system.  ...  4] The data in this case study was taken from a leading global manufacturer of advanced magnetic materials and related products, located at Pekan, Pahang.  ... 
doi:10.15282/jmmst.v5i1.6083 fatcat:jpsbccqqezbbvb64qfkx2sdrvu

Configuration of manufacturing software through capability specification and selection

Can A. Dogan, Robert P. Davis
1994 Applied Mathematical Modelling  
In this paper a mathematical programming approach to the configuration of manufacturing planning and control software is presented.  ...  The approach is illustrated for the configuration of software that would support activities at the tactical level in a manufacturing environment.  ...  manufacturing world there is a real need for software and a computer to realize the full benefits of JIT."'  ... 
doi:10.1016/0307-904x(94)90256-9 fatcat:f6jvj4g4sney3mumghfc2nczqi

Modeling of Mechanical Properties of a Parabolic Antenna with Composite Radome in ANSYS Software Environment

Oleg P. Ponomarev, JSK "Ural Manufacturing Company "Vector", Ekaterinburg, Russia
2018 Ural Radio Engineering Journal  
Modeling of thermostressed states of a parabolic aluminium mirror covered by radio transparent radome under gravity, wind and temperature effects is performed.  ...  A procedure is described to prepare a geometrical model for calculations in the ANSYS 2018, vol. 2, № 3 О. П.  ...  The author is grateful to specialists of CADFEM CIS Co. and personally to Mr. Dmitry Mikhalyuk for kindly provided software and consultations.  ... 
doi:10.15826/urej.2018.2.3.002 fatcat:46qbc7s5kbc3ri4mxezptuakci

A systematic literature review of modelling approaches and implementation of enabling software for supply chain planning in the food industry

David Stüve, Robert van der Meer, Mouhamad Shaker Ali Agha, Matthias Lütke Entrup
2022 Production and Manufacturing Research: An Open Access Journal  
Furthermore, academic literature on the implementation of software tools for SCP practices is investigated. The literature review reveals that multiple models for SCP practices have been developed.  ...  The findings suggest that developed models for the examined planning tasks are implemented to a limited extent in practice.  ...  Their model is applied and verified in a case study of a pasta manufacturer. Several authors Table 2 . 2 Example models for SCND.  ... 
doi:10.1080/21693277.2022.2091057 fatcat:xvtijsoe4nflrnqqtmafyb3lam

BetaMol: A Molecular Modeling, Analysis and Visualization Software Based on the Beta-Complex and the Quasi-Triangulation

Youngsong CHO, Jae-Kwan KIM, Joonghyun RYU, Chung-In WON, Chong-Min KIM, Donguk KIM, Deok-Soo KIM
2012 Journal of Advanced Mechanical Design, Systems, and Manufacturing  
In this paper, we introduce the BetaMol, a molecular modeling, analysis, and visualization software based on the recent theory of the beta-complex and the quasi-triangulation that are derived from the  ...  Therefore, it is frequently desirable to understand geometric characteristics of a molecule more precisely and efficiently.  ...  Acknowledgments This work was supported by the National Research Lab grant funded by the Ministry of Education, Science, and Technology, Korea (No. 2011-0020410).  ... 
doi:10.1299/jamdsm.6.389 fatcat:j37zcjrebfaopcy35kb33nfxwq

Stamping set modeling to aluminum coins manufacturing through 3D software CAD/CAE

Santos Diego Barbosa Pratis, Maia Luis Henrique A., Martins Paulo Sérgio, Freitas Júlio César Lemos de, Drumond Ramon Martins, Cheikh Elhadji, Pereira Otávio dos Santos
2020 International Journal of Advanced Engineering Research and Science  
Among several manufacturing processes this paper will highlight stamping process in a high level way and how finite elements simulations can support analysis of displacement and deformation of parts when  ...  The time-to-response, level of accuracy and its consequent quality required to manufactured goods have demanded from engineers efficient methods to get a reasonable design.  ...  This work presents the development and outcomes generated from a software CAD simulation of an experimental pneumatic stamping to manufacturing of coins. II.  ... 
doi:10.22161/ijaers.72.10 fatcat:nnjs57zi3jd5rgatblu2jltrte

201 A Development of Distributed Virtual Factory : Integration of Area Simulators Modeled by Various Simulation Softwares
201 分散仮想工場の構築 : 異なるシミュレーションソフトウェアによるエリアシミュレータの統合(OS4 生産システムとCAD/CAM)

Susumu FUJII, Toshiya KAIHARA, Kentarou SASHIO
2001 The Proceedings of The Manufacturing & Machine Tool Conference  
The distributed virtual factory ( DVF ) based on the concept of dis 七 ributed simulation has been proposed as anew simulation environment to evaluate the performance of large scale manufacturing systems  ...  a Distributed Virtual Factory 場 を 構 築 す る こ と とす る .加 工 A ,加 工 B ,組み 立 て ,配 送 セ ン タ ー ,2 っ の 協力 工 場 ,お よ び ,素材 倉庫 ,部 品 倉 庫 ,製品 倉庫 の 9 っ の エ リ ア シ ミ ュ レ ー タ か ら構 成 さ れ る 生 産 シ ス テ ム で あ る ,さ ら に , エ リア  ...  加 工 A ,加 工 B ,組 み 立 て 一 Windows98 AweSim ( VisualSLAM ) 。 配 送 セ ン タ ー , 各 倉 庫 ,生 産 管 理 一 UNIX smp1 (c 言 語 ) @ 搬 送 シ ス テ ム ー Windows2000 smpl (c 言 語 ) 。  ... 
doi:10.1299/jsmemmt.2001.3.37 fatcat:tyuuseukq5cl5aadgrwzfwxaey

A Unified Decision Model for Evaluation and Selection of MES Software [chapter]

Liang Chao, Qing Li
IFIP International Federation for Information Processing  
In addition, the relationships among functionalities which MES software performs are also taken into consideration. Finally, we validate the decision model through a test.  ...  In this paper, we explore the potential of applying the analytic network process (ANP) to evaluate and select MES software.  ...  INTRODUCTION Since introduced in 1990, Manufacturing Execution Systems (MES), a category of industrial software for the manufacturing environment, has been adopted in a number of industries.^ As increasing  ... 
doi:10.1007/0-387-34403-9_96 dblp:conf/prolamat/ChaoL06 fatcat:nq7kzushk5ashm32fdfepsmefi

Drivers of Automation and Consequences for Jobs in Engineering Services: An Agent-Based Modelling Approach

Hildegunn Kyvik Nordås, Franziska Klügl
2021 Frontiers in Robotics and AI  
This paper studies the uptake of AI-driven automation and its impact on employment, using a dynamic agent-based model (ABM).  ...  From the manufacturing firms' point of view, switching to the software model requires restructuring of production and there are network effects in switching.  ...  0.2 θ i Productivity level, manufacturing firm i Pareto distributed A 0 Scale parameter, manufacturing, software model 3 μ Strength of network effects of using software 0.02 δ License fee, software 10  ... 
doi:10.3389/frobt.2021.637125 pmid:34041273 pmcid:PMC8141855 fatcat:uyxqd64dqffnpdihih4gfcuiim

Integrating Manufacturing Simulation Tools Using Distributed Object Technology [chapter]

Nicola Senin, Roberto Groppetti, Alessandro Rossi, David R. Wallace
2000 Advances in Networked Enterprises  
a framework based on Distributed Object Technology, to build a multiple domain model of a manufacturing cell.  ...  A modular approach for modeling, simulation and control of production systems, embracing multiple domains from the shop floor level to the single workstation is presented.  ...  Figure 3 shows the PNbased software prototype built by the authors for manufacturing system modeling. A model of a manufacturing cell with two machine tools (workstations) is shown.  ... 
doi:10.1007/978-0-387-35529-0_43 fatcat:md22zctsmrdejb4jq6a2o73pmu

A manufacturing process information model for design and process planning integration

Shaw C. Feng, Eugene Y. Song
2003 Journal of manufacturing systems  
This model is capable of describing the hierarchical structure of the information representing manufacturing processes of an artifact by means of recursive definition.  ...  The National institute of Standards andTechnology (NIST) Design and Process Planning Integration (DPPI) project is developing an open, neutral manufacturing process object model to enable software interoperability  ...  The integration of cost models with man ing resource capability models and process p models has to be further developed, for an in model is necessary to enable software interope Summary of Manufacturing  ... 
doi:10.1016/s0278-6125(03)90001-x fatcat:r66dcmc4g5cclcgkzjy4wh34dm

Data integration in Digital Manufacturing based on application Protocols

Dominik Petzelt, Julian Schallow, Jochen Deuse
2010 2010 3rd International Conference on Computer Science and Information Technology  
Particularly in the field of manufacturing process planning known as Digital Manufacturing a wide range of different and specialized software tools is used, e.g. in assembly planning, logistics planning  ...  In this approach, application-specific data models are used to define data relevant for a certain domain of the product and production development process.  ...  The author is responsible for the contents of this publication.  ... 
doi:10.1109/iccsit.2010.5564807 fatcat:znvwz4fo7vgghizi5mqvxahmde

Simulation-Based Manufacturing Interoperability Standards and Testing

Guo Dong Shao, Swee Leong, Charles McLean
2009 Key Engineering Materials  
A new, dynamic, simulation-based interoperability testing facility for manufacturing software applications is being developed at the National Institute of Standards and Technology (NIST).  ...  Develop¬ment of custom integrations of manufacturing software incurs costs and delays that hurt industry productivity and competitiveness.  ...  Fig. 1 is an example of a real machine tool and its' virtual model.  ... 
doi:10.4028/ fatcat:5ezm6w6cjvg5dpgqczuyubsfvi

Simulation-Based Manufacturing Interoperability Standards and Testing

Guo Dong Shao, Swee Leong, Charles McLean
2009 Key Engineering Materials  
A new, dynamic, simulation-based interoperability testing facility for manufacturing software applications is being developed at National Institute of Standards and Technology (NIST).  ...  Development of custom integrations of manufacturing software incurs costs and delays that hurt industry productivity and competitiveness.  ...  Fig. 1 is an example of a real machine tool and its' virtual model.  ... 
doi:10.4028/ fatcat:l7brxzi3azbmjkelulyh4plrkq

Factory Modelling: Combining Energy Modelling for Buildings and Production Systems [chapter]

Peter D. Ball, Melanie Despeisse, Steve Evans, Rick M. Greenough, Steve B. Hope, Ruth Kerrigan, Andrew Levers, Peter Lunt, Vincent Murray, Mike R. Oates, Richard Quincey, Li Shao (+2 others)
2013 IFIP Advances in Information and Communication Technology  
The paper presents a literature review, develops the conceptual modelling approach and introduces the prototype IES Ltd THERM software.  ...  This is despite manufacturing operations using and discarding energy with the support of facilities.  ...  would like to thank important contributions from the UK's Technology Strategy Board (TSB) and other individuals in Airbus, IES and Toyota contributing to the TSB funded THrough-life Energy and Resource Modelling  ... 
doi:10.1007/978-3-642-40352-1_21 fatcat:uduvravgljbjtcmqd7yjjqfqka
« Previous Showing results 1 — 15 out of 839,019 results