An Investigation of a Post-tension Problem in a Conference Hall Roof release_sn7n5qmqg5hwpgehdhqiodlunu

Abstract

<jats:sec> <jats:title>Introduction:</jats:title> Post-tensioning is a technique for strengthening concrete members by embedding tendons into the concrete before casting. When the concrete has acquired the desired strength, these tendons are tensioned using hydraulic jacks. This study deals with structurally analyzing and designing a 21 m × 25 m conference hall without interior columns contained within eleven stories building. </jats:sec> <jats:sec> <jats:title>Methods:</jats:title> The hall was located on the 9<jats:sup>th</jats:sup> floor. Many structural floor systems were proposed for the hall such as composite steel-concrete, waffle concrete, and post tensioned girder slab. The structural system of post-tensioned concrete girders with a top reinforced slab was chosen due to its advantages: low deflection and low risk of cracking, and increase of net floor height. Stressing of strands (live ends) was applied from the four sides of the concrete slab. Twenty-three live ends were placed in north-south direction and 20 live ends in east-west direction. </jats:sec> <jats:sec> <jats:title>Results:</jats:title> The ultimate strength of the stands was 1860 MPa. The jacking force, 209 kN, was applied in each strand which represented 75% of ultimate strength. The post-tension concrete slab was analyzed with Ram concept software, which revealed that the total elongation of strands in the E-W direction ranged from 116 mm to 152 mm, and the total elongation of strands in the N-S direction ranged from 120 mm to 172 mm. </jats:sec> <jats:sec> <jats:title>Conclusion:</jats:title> The problem of warping of nine live anchorage ends in the south-north direction was encountered during post-tensioning, which resulted in the movement of strands from their original locations. A rehabilitation plan was proposed to overcome the aforementioned problem. </jats:sec>
In application/xml+jats format

Archived Files and Locations