Numerical Simulation of Heat Transfer Coefficient and Film-Cooling Performance Influenced by the Orientation of Internal Turbulence Promoting Ribs
release_cjhytdtscbcy5hrzgb3s36vkhy
by
Yukiko AGATA,
Toshihiko TAKAHASHI,
Eiji SAKAI,
Koichi NISHINO
References
NOTE: currently batch computed and may include additional references sources, or be missing recent changes, compared to entity reference list.| Showing 1 - 17 of 17 references (in 243ms) | ||
|---|---|---|
[b0]via grobid |
Thole, K. A., Gritsch, M., Schultz, A., and Wittig, S., Effect of a Crossflow at the Entrance to a Film-Cooling Hole, Transactions of the ASME, Journal of Fluids Engineering, Vol.119(1997), pp.533-540.
| |
[b1]via grobid |
Peterson, S. D., and Plesniak, M. W., Evolution of jets emanating from short holes into crossflow, Journal of Fluid Mechanics, Vol.503(2004), pp.57-91.
| |
[b2]via grobid |
Fric, T. F. and Roshko, A., Vortical structure in the wake of a transverse jet, Journal of Fluid Mechanics, Vol.279(1994), pp.1-47.
| |
[b3]via grobid |
Kohli, A., and Thole, K., A CFD investigation on the effects of entrance crossflow directions to film cooling holes, Proceedings of the ASME Heat Transfer Division,Vol.1 & 2 (1997), pp.223-232.
| |
[b4]via grobid |
Kissel, H. P., and Ungewickell, A., An experimental and numerical investigation of the effect of cooling channel crossflow on film cooling performance, ASME paper GT2007-27102 (2007).
| |
[b5]via fuzzy |
Effects of Turbulence Promoters of Gas Turbine Blades on Film Cooling Performance
Yukiko AGATA, Toshihiko TAKAHASHI, Eiji SAKAI, Koichi NISHINO 2012 Journal of Thermal Science and Technology doi:10.1299/jtst.7.603 |
web.archive.org
[PDF]
|
[b6]via grobid |
Agata, Y., Takahashi, T., Sakai, E., Nishino, K., Effects of Orientation of Internal Turbulence Promoting Ribs on Flow characteristics for Film Cooling, Journal of Thermal Science and Technology, Vol.8(2013), No.1, pp.15-27.
| |
[b7]via grobid |
Kumada, M., Hirata, M., and Kasagi, N., Studies of a Full-Coverage Film Cooling. Part2: Measurement of Local Heat Transfer Coefficient, ASME Paper No. 81-GT-38 (1981).
| |
[b8]via grobid |
Goldstein, R. J., and Taylor, J. R., Mass Transfer in the Neighborhood of Jets Entering a Crossflow, Transactions of the ASME, Journal of Heat Transfer, Vol.104(1982), pp.715-721.
| |
[b9]via grobid |
Cho, H. H., and Goldstein, R. J., Heat (Mass) Transfer and Film Cooing Effectiveness with Injection Through Discrete Holes: Partâ…¡-On the Exposed Surface, Transactions of the ASME, Journal of Turbomachinery, Vol.117(1995), pp.451-460.
| |
[b10]via grobid |
Hay, N., Lampard, D., and Saluja, C. L., Effects of Cooling Films and the Heat Transfer Coefficient on a Flat Plate with Zero Mainstream Pressure Gradient, Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, Vol.107(1985), pp.105-110.
| |
[b11]via grobid |
Ammari, H. D., Hay, N., and Lampard, D., The Effect of Density Ratio on the Heat Transfer Coefficient from a Film-cooled Flat Plate, Transactions of the ASME, Journal of Turbomachinery, Vol.112(1990), pp.444-450.
| |
[b12]via grobid |
Goldstein, R. J., Jin, P., and Olson, R. L., Film Cooling Effectiveness and Mass/Heat Transfer Downstream of One Row of Discrete Holes, ASME Paper 98-GT-174 (1998).
| |
[b13]via grobid |
Baldauf, S. M., Schulz, A., and Wittig, S., High Resolution Measurements of Local Heat Transfer Coefficients From Discrete Hole Film Cooling, Transactions of the ASME, Journal of Turbomachinery, Vol.123(2001), pp.749-757.
| |
[b14]via grobid |
Walters, D. K. and Leylek, J. H., A Systematic Computational Methodology Applied to a Three-Dimensional Film-Cooling Flowfield, Transactions of the ASME, Journal of Turbomachinery, Vol.119(1997), pp.777-785.
| |
[b15]via grobid |
Na, S., Zhu, B., Bryden, M., and Shih, T.I-P., CFD Analysis of Film Cooling, AIAA Paper, AIAA 2006-22 (2006).
| |
[b16]via grobid |
Mizukami, S., Teramoto, S., and Nagashima, T., Numerical Study on the Vol. 8, No. 3, 2013
| |