Keikinzoku/Journal of Japan Institute of Light Metals
container_dmd5bp2o6rd3zjckpqhnbn75r4
The Japan Institute of Light Metals
Showing first 25 out of 6,308 results
Copper and copper alloys for the corrosion-resistant materials.
耐食材料としての銅および銅合金
Koji NAGATA
1987
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.37.89
Mechanically mixed layer in weld interface and mechanical properties of friction welded 5052/2017 aluminum alloys joints.
5052/2017アルミニウム合金摩擦圧接継手接合界面の機械的混合層と機械的性質
Hirotaka FUWANO, Kazuyoshi KATOH, Hiroshi TOKISUE
2000
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.50.157
アルミニウムの押出
Extrusion of aluminum
Yoshiyuki KOBAYASHI, Katsuyoshi SAITO
1980
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.30.349
A STUDY OF PROVENTION FOR CONTACT CORROSION OF LIGHT METALS
MASAO MURATA, TOYOHIKO YOSHIDA
1952
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.1952.4_113
Pre-coated fin stock for airconditioner
Keita Tateyama
2018
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.68.97
Joining of aluminum.
講座 アルミニウムの製造技術 アルミニウムの接合
Masami ASANO
1990
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.40.556
Turning machinability of aluminum-silicon alloy castings
Kinji SATO, Tsuneo SAGA, Shozo MIZUSAWA
1971
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.21.68
Effect of hot rolling temperature on deep drawability of commercially pure aluminum, 1100
Susumu YOSHIDA, Takakazu TANAKA
1973
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.23.66
Deformation and recrystallization of aluminum single- and bi-crystals (3)
Fukuji Inoko
2011
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.61.553
Report on the International Conference on Superplasticity in Advanced Materials-1994
Norio FURUSHIRO
1994
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.44.528
Age hardening characteristics and high temperature tensile properties of Mg-Gd and Mg-Dy alloys.
Mg‐Gd系およびMg‐Dy系合金の時効硬化特性および高温引張特性
Shigeru IWASAWA, Yuji NEGISHI, Shigeharu KAMADO, Yo KOJIMA, Ryuji NINOMIYA
1994
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.44.3
I met with aluminum
Shizuo ZAIMA
1981
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.31.697
アルミニウム関連統計について (No. 3)
1989 | Keikinzoku/Journal of Japan Institute of Light Metalsdoi:10.2464/jilm.39.479
Curling behavior during aluminum tube end flaring with hemispherical dies.
アルミニウム円管端末の球面状口広げ成形中に生じるカーリング現象
Kimiyoshi KITAZAWA, Mutsumi TSUJIDE, Masaru KOBAYASHI
1989
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.39.609
Determination of trace sodium and nitrogen in aluminium
Yukio KITANO, Kazuichi AKIYAMA, Kichio AKIYAMA, Tsuyoshi OZAKI
1957
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.7.3_76
Al‐Cu‐Cd系のAlすみの状態図について
Study on the phase diagram at the Al corner of the Al-Cu-Cd alloy system
Hisafuji WATANABE, Tsuneyoshi OKAMOTO, Norio KONO
1974
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.24.246
AZ91Dマグネシウムチクソモールド品への振動バレル研磨の適用
Application of the vibratory barrel finishing to the AZ91D magnesium thixomold products
Makoto HINO, Koji MURAKAMI, Minoru HIRAMATSU, Katsuji NISHIMOTO, Toshihiro MAEDA, Teruto KANADANI
2004
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.54.499
Influences of Fe and Si on notch toughness and tear resistance of Al-Mg-Mn alloy plates and welds
Toshiyasu FUKUI, Keizo NAMBA
1973
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.23.8
Study on hydrogen in aluminum ingots solidified under high pressure
Yoshinori NISHIDA, Shizuo SUZUKI
1972
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.22.10_628
STUDY ON BRISTER OF ALUMINUM AND ITS ALLOY
HIKARU ITO
1954
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.1954.12_47
Effect of solution-treatment on the corrosion resistance of sand-cast EZ33A-T5 magnesium alloy.
EZ33砂型鋳造マグネシウム合金の腐食挙動に及ぼす溶体化処理の影響
Yoshihiko ASAKAWA, Fumihiro SATO
1995
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.45.522
Fabrication and mechanical properties of SiC whisker-aluminum composite materials.
SiCウイスカー‐アルミニウム複合材料の製造法と機械的性質
Shiro KOHARA, Shuji ASADA
1987
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.37.483
Effect of second phase particles on the bendability of an Al-Mg-Si alloy.
Al‐Mg‐Si系合金の曲げ加工性に及ぼす第2相粒子の影響
Mineo ASANO, Hidetoshi UCHIDA, Hideo YOSHIDA
2002
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.52.448
THE LIGHT METAL DIE CASTING IN JAPAN
SEIKICHI MIURA
1955
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.1955.9
STUDY ON THE USE OF TITANIUM AS AN ALLOYING ELEMENT TO NON-FERROUS ALLOYS, ESPECIALLY CU-ALLOYS
YOSHITSUGU MISHIMA
1955
|
Keikinzoku/Journal of Japan Institute of Light Metals
doi:10.2464/jilm.1955.15_75
« Previous
Showing results 0 — 25 out of 6,308 results
Next »